The PL123-02N is a low-cost general purpose 1-to-2 LVCMOS fan-out buffer. An output enable (OE) pin is available to enable the outputs or disable them into an active low state. When the outputs are disabled, the IC consumes less than 5μA of power. The OE pin incorporates a pull up resistor giving a default condition of logic “1”. The input and outputs are LVCMOS levels and operate up to 200 MHz. Input signals with Spread Spectrum Modulation can also be used. The spread spectrum modulation will not be affected by the PL123-02N as the signal passes through the IC. A space-saving 6-pin DFN package enables designs requiring minimal board area.

Supports 3.3V, 2.5V, and 1.8V power supplies
Frequency Support:
3.3V Supplies: DC – 200 MHz
2.5V Supplies: DC – 150 MHz
1.8V Supplies: DC – 100 MHz
Output Enable (OE) pin
LVCMOS Input/Output
Accepts SST and non SST clock signals
Operating temperature range from -40°C to 85°C
Available in space-saving 6-pin DFN GREEN package

Select all	Attribute	Value
	Brand	Microchip
	Number of Elements per Chip	3
	Maximum Supply Current	0.8 mA
	Maximum Input Frequency	200MHz
	Mounting Type	Surface Mount
	Package Type	DFN
	Pin Count	6
	Dimensions	1.35 x 2.05 x 0.55mm
	Length	1.35mm
	Width	2.05mm
	Height	0.55mm
	Maximum Operating Supply Voltage	4.6 V
	Maximum Operating Temperature	+85 °C
	Minimum Operating Supply Voltage	-0.5 V
	Minimum Operating Temperature	-40 °C

	Select all
	Brand Microchip
	Number of Elements per Chip 3
	Maximum Supply Current 0.8 mA
	Maximum Input Frequency 200MHz
	Mounting Type Surface Mount
	Package Type DFN
	Pin Count 6
	Dimensions 1.35 x 2.05 x 0.55mm
	Length 1.35mm
	Width 2.05mm
	Height 0.55mm
	Maximum Operating Supply Voltage 4.6 V
	Maximum Operating Temperature +85 °C
	Minimum Operating Supply Voltage -0.5 V
	Minimum Operating Temperature -40 °C

Microchip PL123-02NGI PLL Clock Buffer 6-Pin DFN

Be the first to know about our latest products and services