Nexperia 74HC244D,653 10-Channel Buffer & Line Driver, 3-State, 20-Pin SOIC

  • RS Stock No. 136-2147
  • Mfr. Part No. 74HC244D,653
  • Brand Nexperia
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Use our solutions to improve signal integrity between lower drive outputs and higher loads. They include mixed 5 V and 3.3 V applications, with low propagation delay, and improved current drive and signal levels. Great in standard and advanced systems from TVs and phones to industrial monitoring

Mixed 5 V and 3.3 V applications
Improved current drive and voltage level of signals
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
TTL input options
3-state output options
Overvoltage tolerant options
Registered options

The 74HC244, 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC

Input levels:
For 74HC244: CMOS level
For 74HCT244: TTL level
Octal bus interface
Non-inverting 3-state outputs
Complies with JEDEC standard no. 7 A
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Multiple package options
Specified from 40 Cto +85 C and 40 Cto +125 C

Specifications
Attribute Value
Logic Family 74HC
Logic Function CMOS
Number of Channels per Chip 10
Input Type Single Ended
Output Type 3 State
Polarity Non-Inverting
Mounting Type Surface Mount
Package Type SOIC
Pin Count 20
Maximum High Level Output Current +7.8mA
Maximum Low Level Output Current -7.8mA
Maximum Propagation Delay Time @ Maximum CL 165 ns @ 15 pF
Dimensions 13 x 7.6 x 2.45mm
Height 2.45mm
Minimum Operating Supply Voltage 2 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Width 7.6mm
Propagation Delay Test Condition 15pF
Length 13mm
Maximum Operating Supply Voltage 6 V
Available to back order for despatch when stock is available
Price Each (On a Reel of 2000)
£ 0.127
(exc. VAT)
£ 0.152
(inc. VAT)
Units
Per unit
Per Reel*
2000 - 2000
£0.127
£254.00
4000 - 4000
£0.122
£244.00
6000 +
£0.117
£234.00
*price indicative
Related Products
The HEF4081B is a quad 2-input AND gate. ...
Description:
The HEF4081B is a quad 2-input AND gate. The outputs are fully buffered for highest noise immunity and pattern insensitivity to output impedance variations. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to ...
The HEF4081B is a quad 2-input AND gate. ...
Description:
The HEF4081B is a quad 2-input AND gate. The outputs are fully buffered for highest noise immunity and pattern insensitivity to output impedance variations. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to ...
The 74LCX540FT is a high-performance CMOS octal bus ...
Description:
The 74LCX540FT is a high-performance CMOS octal bus buffer. Designed for use in 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. The device is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5 V supply environment for both ...
The 74LCX541FT is a high-performance CMOS octal bus ...
Description:
The 74LCX541FT is a high-performance CMOS octal bus buffer. Designed for use in 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. The device is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5 V supply environment for both ...