Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

• The low-temperature rise enables the fuse to be suitable for high-density mounting
• Fuse links, specifically designed for the protection of equipment
• Conforms to industry standards
• Low voltage fuse
• High rupture capacity (HRC)
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS 88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

The British standard fuse is a low voltage device designed for dependable performance in a range of industrial applications. It has a current rating of 63 A and operates at a voltage rating of 500 V. With compact dimensions of 87mm in length and 22.3mm in diameter, it is suitable for installations in confined spaces.

• High rupture capacity provides protection against overload
• Suitable for motor protection applications, contributing to system reliability
• Compliance with BS 88 and IEC 269 standards ensures safety
• Offset bolted tags enable secure connections
• 80 kA breaking capacity mitigates electrical hazards
• Compatible with various fuse holders for added versatility

• Suitable for general industrial that require substantial protection
• Works with RS63 Red Spot fuse holder for improved compatibility
• Compatible with CM63F Camaster fuse holder for secure installation

Yes, it operates effectively at 500 V.

Yes, it is specifically designed for motor protection applications.

Yes, its compact dimensions facilitate easy installation.

Yes, it is compatible with multiple types of fuse holders.

Yes, it meets BS 88 and IEC 269 safety specifications.

Eaton formerly known as Bussmann