Moflash LEDS100 Series Amber Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65

RS Stock No.:: 865-1704
Mfr. Part No.:: LEDS100-05-01
Brand:: Moflash

Moflash LEDS100 Series Amber Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65

Price Each**

£50.91

(exc. VAT)

£61.09

(inc. VAT)

13 In stock - FREE next working day delivery available*

2 available from Europe for delivery within 2 working day(s).

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over £50.00

Units	Per unit
1 +	£50.91

**price indicative

RS Stock No.:: 865-1704
Mfr. Part No.:: LEDS100-05-01
Brand:: Moflash

Moflash Industrial ECO LED Beacon - LEDS100 Series

The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.

Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
2 stud fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked

Moflash Amber LED Beacon, 40 to 380V DC, 85 to 285V AC - LEDS100 Series - LEDS100-05-01

This Moflash LED (light-emitting diode) beacon is used to signal hazards in commercial and industrial work environments. The warning light has a 360° output along the vertical axis to make sure the warning signal is visible in all directions. The LED bulb is bright enough to be seen clearly in most lighting conditions for effective signalling. It's also energy-efficient thanks to its low current consumption of just 35mA. For versatility, the light can be set to a flashing or continuous mode via a jumper link on the PCB (printed circuit board).

Features & Benefits

• Broad operating temperature range of -25°C to +55°C for use in demanding environments
• Polycarbonate (PC) lens material is impact-resistant and UV (ultraviolet) stable for use in harsh conditions
• Wide supply voltage range of 40 to 380V DC (direct current) or 85 to 285V AC (alternating current) for use in most set-ups

Applications

• Maintenance equipment
• Emergency service vehicles
• Airport baggage claims
• Manufacturing lines

Is this beacon suitable for use in damp or dusty environments?

The beacon has an IP65 (ingress protection) rating, so it's completely protected against dust and low-pressure water jets from all directions.

Attribute	Value
Supply Voltage	85 → 280 V ac, 85 → 380 V dc
Light Effect	Flashing
Lens Colour	Amber
Mounting Style	Surface Mount
Bulb Type	LED
Current Type	AC, DC
Current Consumption	35mA
Base Diameter	72mm
Housing Colour	Black
Lamp Included	Yes
Series	LEDS100
Multifunction	Yes
Height	107mm
IP Rating	IP65
Base Length	33mm
Special Features	Dust Proof, Low Current Consumption, Water Resistant
Maximum Temperature	+55°C
Standards Met	CE Certified
Minimum Temperature	-25°C