This deep-groove ball bearing from SKF is shielded for a longer lifespan and reduced maintenance needs. Metal shields on the outer race prevent dirt from entering the unit and protect its lubrication, so re-greasing isn't needed. The shields also reduce wear and deterioration of the bearing by keeping its grease clean. You can use this component in high-speed applications and with radial or axial loads in both directions.

• Parallel bore type
• Shielded end type
• Dynamic load rating of 5.85 kN
• Static load rating of 2.85 kN
• Inside diameter of 15 mm
• Outside diameter of 32 mm
• Steel material with steel cage, race and balls
• Single row
• Plain race type
• Race width of 9 mm

• Printing industry
• Pulp and paper manufacturing
• Food and beverage industry
• Minerals processing

Shielded bearings are mainly used in applications where the inner ring rotates but the outer ring stays stationary. If the outer ring rotates there's a risk that the grease will leak from the bearing at high speeds.

The most important working conditions to consider are the load weight and speed you require, plus the temperature and cleanliness of the application.