FAG 626-2RSR-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD

This deep groove ball bearing provides sealed, single-row rolling support for rotating shafts in industrial assemblies. It is designed for Compact assemblies requiring sealed protection and a steel sheet cage for sustained operation across a broad temperature range. The unit is intended for use where moderate radial loads and high rotational speeds are required in automation and electrical equipment.

• Limiting speed 25,500 r/min for high-speed applications
• Basic dynamic load rating 2,800 N to resist operational radial forces
• Basic static load rating 1,060 N for short-term static loads
• Sealed on both sides to prevent contamination ingress
• Steel sheet metal cage for dimensional stability under rotation
• CN internal clearance for controlled shaft fit and preload management

• Suitable for high-speed motors in automation systems
• Ideal for precision fans and cooling blowers in electronics
• used with small gearboxes in robotics and actuators
• Can be used for spindles in Compact electrical tools

The bore accepts a 6mm shaft for direct press-fit or light interference mounting.

It functions between −30 °C and 100 °C, accommodating typical industrial environments.

The design permits a maximum housing shoulder diameter of 16.6mm and requires a minimum shaft shoulder diameter of 8.4mm for proper seating.

A minimum chamfer of 0.3mm is required and the fillet radius must not exceed 0.3mm to ensure correct ring contact.