• RS Stock No. 828-6356
  • Brand RS Pro
RS Pro
RS Pro IdeaWerk 3D Printer
Product Details

RS IdeaWerk 3D Printer

The RS IdeaWerk 3D printer is designed to handle the toughest print jobs, is easy to assemble and use and lightweight enough to be portable.

The printing process is controlled with a touch screen panel for file selection and job initiation. Using an advanced algorithm to improve the quality of printed objects, the RS IdeaWerk 3D printer can print with detailed precision at a 0.18 mm layer thickness.

No need to purchase additional software or accessories, just assemble, connect and begin printing immediately
Using environmental friendly PLA, the RS IdeaWerk 3D printer produces no toxicity, chemical pollution or smell and is suitable for secondary process, such as assembling nuts, drilling, polishing and colouring
The RS IdeaWerk 3D printer is easy to use and means you can print either online or offline (with or without pc)
Large build area of 150 x 150 x 140 mm that allows you to push the potential of your protyping
Low print noise and is ideal for office, home or classroom
The RS IdeaWerk 3D printer is highly accurate, stable and will help reduce down time

Compatible with:

Windows XP (32bit); Vista (32bit); Windows 7 (32bit and 64bit); Windows 8; Windows 8.1

Printer Size: 298´221´403mm
Printing Size: 150´150´140mm
Layer Thickness: 0.2∼0.3mm (0.2mm recommended)
Material: PLA
Printing Temperature: PLA 220-230゚C
Power Input: 100 - 240Vac 47/63Hz 1.6A
Output: 12V/DC 5.3A
Maximum Power: 63.6W
File format: STL/X3G/CODE


Recommended SD Card RS 758-2552 This 3D Printer will NOT work with SDHC Cards

Basic technical competency is recommended for set up, use and on-going maintenance of this 3D printer throughout it's lifetime
Do not leave your 3D Printer to print unattended. Any damage caused by unattended usage will void the warranty

  • 3D Printers should not be left to print unattended.
Add product to Compare
Not what you’re looking for? Select the attributes you require, then click the button below
Build Volume150 x 150 x 140mm
Multi Material PrintingNo
Minimum Layer Height0.2mm
Number of Heads1
Dimensions L x W x H211 x 403 x 298mm
Filament Diameter1.75mm
ConnectivitySD Card, USB
Build Speed30mm/s
Plug TypeType C - European Plug, Type G - British 3-Pin, Type I - Australian 3-Pin
Select all
Customer reviews
Average customer rating  ( 1 Customer reviews )

Add a review - Log In

Any customer reviews posted constitute the statements of the customer and are not the statements of RS. RS is not responsible for the accuracy or completeness of any customer review, and is not liable for any loss or damage which may result from any customer review.

Good Function Printer
Good 3d Printer, most of the prints I have done have worked and it is reasonably quick. Bad Points : Software is shocking you can switch on extruder but cant it switch off You cannot change the raft size You cannot pause a print No preview Doesn't support Reptier/Cura software which is far better Need to print from memory card to really get it to work as is laptop sleeps on USB it stops printing Very little information / support for issue on line, RS seem to be only distributor. Not supported by 3d Printing forums but does support Standard formats. Good Points : Set up out of Box Comes with roll of PLA Does work No Calibration Required, Set up porcuedure take about 5 mins Supports Tinker Cad Files and ThingVerse Think if the software / firmaware worked with Repetier/Cura then this would be a 5* printer... but good starting point far better than the built it yourself (Chineese) printers.


Reviewed by:

Created on:
Sep 19, 2016

4 of 4 people found this review helpful.

Did you find this review useful?  Yes |  No
38 In stock for FREE next working day delivery
Was £567.98
Price Each
Check stock levels
Technical Reference
  • RS Components

    Statement of conformity

    The product detailed below complies with the specifications published by RS Components. Where applicable it provides assurance that electrostatic discharge sensitive devices have been handled and packed under conditions that meet the administrative and technical requirements of the ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards.
    RS Stock No. 828-6356
    Description RS Pro IdeaWerk 3D Printer
    Manufacturer/Brand: RS Pro
    Mfr. Part No. RS 3D Printer
    The foregoing information relates to product sold on, or after, the date shown below.
    Date Dec 18, 2017
    RS Components Ltd, Birchington Road, Corby, Northamptonshire, NN17 9RS, UK
Similar Products
View Similar Products

Alternative for RS Pro IdeaWerk 3D Printer

You may also like

Related Products
Includes Smart Extruder+On-Board CameraLCD Display1.75 mm Filament. Fused ...
Includes Smart Extruder+On-Board CameraLCD Display1.75 mm Filament. Fused Deposition Modeling. Send print files to your 3D printer via Wi. Fi, USB, Ethernet or with a USB drive. Flex Build Plate. The Maker. Bot Replicator+ prints 30% faster than its predecessor ...
• Assembly in under 2 hours• A DIY ...
• Assembly in under 2 hours• A DIY printer with professional results• In-house designed extruder with a Double Drive Gear traction system• Self-levelling via an inductive sensor• BQ Heated bed kit for Hephestos 2. To create flawless results with the ...
Special Single ExtruderSD-Controller with LCD Display. Special 3-Point-Printbed ...
Special Single ExtruderSD-Controller with LCD Display. Special 3-Point-Printbed (200mm x 200mm)Layerhight, adjustable: from 0,1mm up to 0,3mm. Teflon-coated Fibonacci Filament Guiding System. Rigid Metall-Housing with chrome coating. Special printspace-door for safetyCE safety certified. The bq Witbox is a ...
Frequently Asked Questions
Need some help?
Call our Customer Services team on:
08457 201201