The UltiMaker 3 is the latest device dedicated to delivering an incredibly reliable 3D printing experience. It has a unique auto-nozzle lifting system, professional build and support material combinations, along with swappable print cores. It has an electric rating of 100 to 240VAC.

Dual extrusion build volume: up to 197 x 215 x 200mm (7.8 x 8.5 x 7.9in)
Layer resolution up to 20micron with the 0.4mm nozzle
Printing temperature of maximum 280°C
Dual extrusion with dissolvable support materials (PVA)
Interchangeable print cores
Heated print bed with active bed levelling
Hardware innovations
New optimised cooling
LED status indicators
NFC material scanner

Technology Fused deposition modeling (FDM)
Print head Dual-extrusion print head with an auto-nozzle lifting system and swappable
print cores
Build volume UltiMaker 3 UltiMaker 3 Extended
Left nozzle: 215 x 215 x 200 mm 215 x 215 x 300 mm
Right nozzle: 215 x 215 x 200 mm 215 x 215 x 300 mm
Dual material: 197 x 215 x 200 mm 197 x 215 x 300 mm
Filament diameter 2.85 mm
Layer resolution 0.25 mm nozzle: 150 – 60 micron
0.40 mm nozzle: 200 – 20 micron
0.80 mm nozzle: 600 – 20 micron
XYZ accuracy 12.5, 12.5, 2.5 micron
Print head travel speed 30 – 300 mm/s
Build speed < 24 mm³/s
Build plate Heated glass build plate
Build plate temperature 20 – 100 ºC
Build plate leveling Active leveling
Supported materials Nylon, PLA, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway
Nozzle diameter 0.25 mm, 0.40 mm, 0.80 mm
Nozzle temperature 80 – 280 ºC
Nozzle heat up time < 2 min
Build plate heat up time < 4 min (20 - > 60 ºC)
Operating sound 50 dBA
Material recognition Material recognition with NFC scanner
Connectivity Wi-Fi, LAN, USB port
Monitoring Live camera