Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Read more Read less

    Filters

    Viewing 81 - 100 of 164 products
    Results per page
    Description Price Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Calibrated Safety Category Level
    RS Stock No. 518-1019
    Mfr. Part No.99.00191
    BrandStaubli
    £35.05
    1 Set
    Set(s)
    Test Lead - Right Angle Plug, Straight Plug - 1m 19A 1000V CAT II 1000 V - - - CAT II
    RS Stock No. 726-3627
    Mfr. Part No.TP1-1
    BrandFluke
    £18.00
    Each
    Units
    Test Probe Kit - Flat Blade - - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS Stock No. 106-0429
    Mfr. Part No.80PK-1
    BrandFluke
    £28.00
    Each
    Units
    Bead Probe - Miniature Thermocouple - 1m - - - - +200 °C, +260 °C - -
    RS Stock No. 442-8301
    Mfr. Part No.0532424
    BrandFluke
    £141.00
    Each
    Units
    High Voltage Probe - Banana Plug - - - 6000V CAT I 6000 V 0°C +50°C - CAT I
    RS Stock No. 911-9721
    Mfr. Part No.0532424
    BrandFluke
    £190.00
    Each
    Units
    High Voltage Probe - Banana Plug - - - 6000V CAT I 6000 V 0°C +50°C RSCAL CAT I
    RS Stock No. 424-4686
    Mfr. Part No.SPL2400
    £28.95
    1 Set
    Set(s)
    Test Lead Kit - 2 mm Male, 2.4 mm Male, 4 mm Male - 1m 10 A, 12 A, 32 A 1000V CAT II 1000 V - - - CAT II
    RS Stock No. 880-1407
    Mfr. Part No.FTP-1
    BrandFluke
    £91.00
    Each
    Units
    Fused Test Probe - Lantern Spring Contact, Threaded Probe Tip Yes - 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +50°C - CAT III, CAT IV
    RS Stock No. 175-9220
    Mfr. Part No.932961001
    £27.75
    Each
    Units
    Test Equipment Set - Miniature Crocodile Clip, Spring Loaded Socket - 1m - - - -40°C +60°C - -
    RS Stock No. 692-7147
    Mfr. Part No.11059A
    £159.00
    Each
    Units
    Kelvin Probe Set - Banana Plug - 800mm - - - - - - -
    RS Stock No. 881-2781
    Mfr. Part No.AC288
    BrandFluke
    £30.00
    Each
    Units
    Extension Lead Set - Retractable Tip - 8.4mm - 1000 V, 600 V CAT III 1000 V, CAT IV 600 V -20°C +55°C - CAT III, CAT IV
    RS Stock No. 705-1954
    Mfr. Part No.Fluke i2500-18
    BrandFluke
    £116.00
    Each
    Units
    Flexible Current Probe - - - 1.8m 2.5kA 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS Stock No. 850-7697
    Mfr. Part No.TL27
    BrandFluke
    £30.00
    Each
    Units
    Test Lead Set - Shrouded - 1.5m 10A 1000 V, 600 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS Stock No. 122-5533
    Mfr. Part No.MP30-08
    BrandMartindale
    £48.00
    Each
    Units
    Test Lead Kit - Plug Yes 1.2m 500mA 1000V CAT IV 1000 V - - - CAT IV
    RS Stock No. 705-1945
    Mfr. Part No.Fluke i2500-10
    BrandFluke
    £116.00
    Each
    Units
    Flexible Current Probe - - - 1.8m 2.5kA 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS Stock No. 731-9395
    Mfr. Part No.972337002
    £17.81
    Each
    Units
    Test Probe Kit - Spring Loaded Pin - 1m 16A 1000V CAT II 1000 V, CAT III 1000 V -15°C +70°C - CAT II, CAT III
    RS Stock No. 760-0373
    Mfr. Part No.U1168A
    £72.16
    Each
    Units
    Test Lead Set - - - - - - - - - - -
    RS Stock No. 122-5534
    Mfr. Part No.MP21-10BK
    BrandMartindale
    £10.00
    Each
    Units
    Crocodile Clip - Crocodile Clip - - - - - - - - -
    RS Stock No. 122-9727
    Mfr. Part No.66.9008-150-21+66.9008-150-22
    BrandStaubli
    £17.37
    Each
    Units
    Test Probe Kit - Straight to Right Angle - 1.5m 20A 1000V CAT II 1000 V - +350°C - CAT II
    RS Stock No. 433-2597
    Mfr. Part No.SET3227
    £28.95
    Each
    Units
    Probe Set - Crocodile Clip - 1m - - - - - - -
    RS Stock No. 122-5532
    Mfr. Part No.MP21-08
    BrandMartindale
    £43.00
    Each
    Units
    Test Lead Kit - Plug Yes 1.2m 500mA 600V CAT IV 600 V - - - CAT IV
    Related Products
    Test lead kit ideal for designing and checking ...
    Description:
    Test lead kit ideal for designing and checking electronic circuits.Precision electronic probes supplied with several crimped spring-loaded probe tips for maximum contact with SMD circuit test points.Test leads with micro-wire grips for fine SMD test.Mini crocodile clips, wire grips and probes suitable for virtually every electronic need.
    Set of accessories made up of probes offering ...
    Description:
    Set of accessories made up of probes offering both more comfortable use and complete safety for operators.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the connections at ...
    Comprehensive set for use in low energy, electronic ...
    Description:
    Comprehensive set for use in low energy, electronic test applications that require fine probing. Compatible with Fluke and most other multimeters,Supplied in a handy vinyl soft wallet. 1.0m silicone lead terminated at one end with 4mm shrouded right angled plug and stainless steel test probe on the other end. Rated ...
    Multi-head test lead set with 4 probe profiles ...
    Description:
    Multi-head test lead set with 4 probe profiles to choose from Interchangeable and reversible probe heads allow multiple combinations of connection and contact Consists of a sprung point to 4mm plug (with hard point), which is reversible2mm and 2.4mm plugs Each probe screws firmly into main bodyA tip protection cap ...