brands

attributes.Oscillator_Type

attributes.Output_Frequency

attributes.Frequency_Stability

attributes.Load_Capacitance

attributes.Package_Type

attributes.Output_Level

attributes.Minimum_Operating_Temperature

attributes.Maximum_Operating_Temperature

attributes.Height

attributes.Dimensions

SYRLINKS 10MHz OCXO Oscillator, Europack High ±10ppb SineEWOS831-5V0-B-S4

SYRLINKS 10MHz OCXO Oscillator, Encapsulated Europack ±10ppb SineSGTM10HP-5V0-B-S4-CO

SYRLINKS 20MHz OCXO Oscillator, Encapsulated DIL14 ±70ppb HCMOSSGTM20-3V3-B-H1-CO

SYRLINKS 10MHz OCXO Oscillator, Encapsulated DIL14 ±70ppb HCMOSSGTM10-3V3-B-H1-CO

SYRLINKS 10MHz OCXO Oscillator, Europack High ±10ppb SineEWOS10HP-5V0-B-S4

SYRLINKS 10MHz OCXO Oscillator, DIL14 Low ±70ppb Clipped SinewaveEWOS10-5V0-B-C1

SYRLINKS 20MHz OCXO Oscillator, DIL14 Low ±70ppb Clipped SinewaveEWOS20-5V0-B-C1


OCXO stands for Oven Controlled Crystal Oscillator. These oscillators offer higher stability than standard Clock Oscillators or TCXO's over temperature variations. They can also offer better overall accuracy over the short term (typically 1x10-12 over a few seconds) and longer-term (typically 1x10-8 (10 ppb) per year).

OCXO's are precision oscillators that can provide a stable oscillation over variations in ambient temperature. OCXO temperature stability can range from the most basic at 500ppb to sophisticated double ovens at 0.02ppb, with most falling between 50ppb and 3ppb.

They work through the tight control of their internal oven that keeps the chamber and the crystal at a set temperature, so holding the frequency stable. The temperature selected for the oven is one at which the slope of the crystal's frequency vs. temperature curve is near zero. This is called the turn point of the crystal and is normally 75'C to 80'C for commercial OCXO's. For industrial-grade OCXO's where the maximum temperature can vary up to 85'C, the turn point will be higher still. The important design consideration is that the turn point/oven temperature must be higher than the operating temperature, so frequency control is maintained.

Output logic options for these oscillators consist of HCMOS, Clipped Sine-wave, and Sine-wave configurations

#### Type of Crystal used

OCXO's generally use AT-cut or SC-cut (Stress-Compensated) crystals in their design, with the SC-cut being used for higher performance. The SC-cut crystal offer flatter frequency vs. temperature curve reduces warmup time and has other good attributes, like better ageing, higher Q resulting in better phase noise, less G-sensitivity, and less sensitive to vibration.

#### Where are OCXO's used?
- Broadcasting
- Satellite Systems
- Telecommunications
- Data communications
- Test and measurement


OCXO Oscillators

Crystals, Oscillators & Resonators

Passive Components

3577158573

3859839647

835775905

845068664

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

IQD 10MHz OCXO Oscillator, ±10ppb HCMOSLFOCXO065520Bulk

IQD 10MHz OCXO Oscillator, ±10ppb HCMOSLFOCXO070939Bulk

IQD 10MHz OCXO Oscillator, SMD ±20ppb HCMOSLFOCXO063800Bulk

IQD 10MHz OCXO Oscillator, 36x27mm DIP ±1ppb SinewaveLFOCXO063815Bulk

IQD 19.2MHz OCXO Oscillator, 7.5 x 5.5 mm ±0.02ppm HCMOSLFOCXO094146

Syrlinks Ocxo Oscillators

7 Products showing for Syrlinks Ocxo Oscillators

Popular Searches

Related links

Be the first to know about our latest products and services