Login / Register to access your benefits
Recently searched

    Sheet Metal & Panel Fasteners

    Our advanced selection of sheet metal and panel fasteners includes many types of nuts, bushes, mandrels, stand-offs and studs, as well as multi-piece insert kits and more.

    These products are suitable for a broad range of metalworking, assembly and production tasks that involve thin sheet metal materials, such as general machinery building/assembly, tube bending, lathe work and mounting rails of equipment racks.

    What are the key differences between panel fastener types?

    • Cage nuts are typically used for mounting front panels to slide systems and instrument housings. A steel nut is held captive in a spring-steel cage for added grip/durability, and ideally used with a range of front panel screws.
    • Captive nuts work similarly to cage nuts; when compressed during insertion they secure, lock and hold the nut in the desired position.
    • Clinch nuts are most often used as permanent installations on thin sheet materials like aluminium. Once inserted into a properly sized hole, a parallel squeezing force is applied to the head of the self-clinching nut, causing a flow of material into specially designed grooves under the head for a load-bearing, torque-resistant joint. Along with self-clinching captive studs, they're often found as fasteners in white goods and various electrical assemblies and enclosures.
    • Self-clinching standoffs work similarly to rivet bushes, in that they're designed to allow greater loads to be affixed to relatively thin or weak materials. They're used to insert a load-bearing thread into a sheet of material, often in order to raise it above another piece (e.g. lifting a PCB away from a metal case to prevent shorting.
    • Through-threaded standoffs are fully drilled out, while the hole in a blind-threaded standoff is only cut to a partial depth for retaining smooth, closed outer panels when inserted flush with a surface.
    • Mandrels are a special type of shaft or bar fastener, designed to be inserted into holes in sheet metals in order to hold them securely in place during machining. They're sold in plain tempered steel varieties, as well as expanding versions (slightly tapered with an expandable wedge for holding your work), or straight threaded nut mandrels.
    Insert Kits
    Insert Kits
    Mandrels
    Mandrels
    Self-Clinching Captive Studs
    Self-Clinching Captive Studs
    Self-Clinching Standoffs
    Self-Clinching Standoffs
    Thread Repair Inserts
    Thread Repair Inserts
    Threaded Inserts
    Threaded Inserts

    316 Products showing for Sheet Metal & Panel Fasteners

    2 of 16
    RS PRO, M6 Brass Threaded Insert, 9.5mm diameter 8mm Depth 12.7mm
    • RS Stock No. 204-0623
    1 Bag of 100
    £67.26
    Recoil Thread Repair Insert, M16 x 2, Drill Size 16.5mm
    • RS Stock No. 291-903
    • Mfr. Part No. 25163
    1 Bag of 10
    £10.78
    Pramet, M2.5 x 5.2 Threaded Insert
    • RS Stock No. 866-0329
    • Mfr. Part No. US 2505-T07P
    Each
    £5.13
    RS PRO Plain, M6 Threaded Insert diameter 9mm
    • RS Stock No. 206-5498
    1 Bag of 100
    £7.07
    Böllhoff Galvanised, M4 Steel Threaded Insert Depth 8mm
    • RS Stock No. 664-7352
    • Mfr. Part No. 56000000078/01
    1 Lot of 100
    £41.78
    RS PRO M8 Mandrel
    • RS Stock No. 165-532
    Each
    £11.70
    RS PRO Plain, M8 Threaded Insert diameter 11mm
    • RS Stock No. 206-5501
    1 Bag of 100
    £11.03
    Böllhoff Plain, M6 Steel Threaded Insert, 10mm diameter 9mm Depth 14mm
    • RS Stock No. 425-7604
    • Mfr. Part No. 34367060230
    1 Lot of 100
    £25.87
    Böllhoff Plain, M5 Steel Threaded Insert, 10mm diameter 7mm Depth 13mm
    • RS Stock No. 425-7547
    • Mfr. Part No. 23307050230
    1 Lot of 100
    £24.70
    RS PRO, M5 Brass Threaded Insert, 7.1mm diameter 6.4mm Depth 9.5mm
    • RS Stock No. 204-0618
    1 Bag of 100
    £39.42
    Recoil Thread Repair Insert, M6 x 1, Drill Size 6.3mm
    • RS Stock No. 528-659
    • Mfr. Part No. 25063
    1 Bag of 10
    £5.53
    AVK 300 Piece Plain Steel Insert Kit AVK AK SERIES KITBOX, M4, M5, M6
    • RS Stock No. 667-3099
    • Mfr. Part No. AVK AK SERIES KITBOX
    1 Kit
    £155.30
    Böllhoff Plain, M5 Stainless Steel Threaded Insert, 9mm diameter 7mm Depth 11.8mm
    • RS Stock No. 212-676
    • Mfr. Part No. 23306050233/01
    1 Bag of 100
    £51.48
    POP Plain, M6 Stainless Steel Threaded Insert, 9.8mm diameter 9mm Depth 14.3mm
    • RS Stock No. 623-5577
    1 Bag of 50
    £34.84
    Böllhoff Plain, M8 Steel Threaded Insert, 16mm diameter 11mm Depth 18mm
    • RS Stock No. 425-7569
    • Mfr. Part No. 23307080230
    1 Lot of 100
    £42.07
    RS PRO Steel Zinc plated & clear Passivated Self Clinching Stud, M6, length-20mm
    • RS Stock No. 827-445
    1 Bag of 50
    £9.70
    RS PRO, M4 Brass Threaded Insert, 7.1mm diameter 5.6mm Depth 8.2mm
    • RS Stock No. 204-0621
    1 Bag of 100
    £34.65
    RS PRO Plain, M8 Threaded Insert diameter 11mm
    • RS Stock No. 206-5503
    1 Bag of 100
    £14.08
    RS PRO M5 Mandrel
    • RS Stock No. 260-5848
    Each
    £12.81
    Böllhoff Galvanised, M5 Steel Threaded Insert Depth 10mm
    • RS Stock No. 664-7355
    • Mfr. Part No. 56000000079/01
    1 Lot of 100
    £46.58
    Results per page
    1
    2
    3
    16

    Guides & Articles

    Article image
    Spacers and Standoffs Guide
    Our guide looks at the different types of spacers and standoffs and explains why you might want to use them.
    Read more
    Article image
    Threaded Inserts Guide
    Learn everything you need to know about threaded inserts with this guide. Discover the different types, uses, and advantages of these versatile fasteners.
    Threaded Inserts Explained

    Related links