Waterproof Duraseal terminals

Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.
The connection, insulation and waterproofing are carried out through shrinking after crimping.

TEConnectivity Crimp Receptacles

The TEConnectivity DuraSeal red insulated crimp receptacle is designed to terminate a tin-plated or bare copper stranded wire having insulation rated or at least 75C to a blade terminal. It will provide a splash-proof and strain relief connection.

Features and Benefits:

• Operating temperature ranges between -55°C and 125°C
• Heat-shrinkable
• Blade terminal: tin plated brass
• Insulated receptacle
• Gender: Male
• Free hanging mount

Applications:

• Tooling
• Installation

Certifications:

• UL approved

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Select all	Attribute	Value
	Brand	TE Connectivity
	Type	Tab
	Minimum Wire Size mm²	0.3mm²
	Gender	Female
	Series	Duraseal
	Maximum Wire Size mm²	0.9mm²
	Tab Size	6.35 x 0.8mm
	Insulation	Insulated
	Maximum Wire Size AWG	18AWG
	Minimum Wire Size AWG	22AWG
	Colour	Red
	Termination Method	Crimp
	Contact Material	Brass
	Contact Plating	Tin
	Insulation Material	Nylon

	Select all
	Brand TE Connectivity
	Type Tab
	Minimum Wire Size mm² 0.3mm²
	Gender Female
	Series Duraseal
	Maximum Wire Size mm² 0.9mm²
	Tab Size 6.35 x 0.8mm
	Insulation Insulated
	Maximum Wire Size AWG 18AWG
	Minimum Wire Size AWG 22AWG
	Colour Red
	Termination Method Crimp
	Contact Material Brass
	Contact Plating Tin
	Insulation Material Nylon

TE Connectivity Duraseal Red Insulated Female Spade Connector, Tab, 6.35 x 0.8mm Tab Size, 0.3mm² to 0.9mm²

FREE delivery for orders over £50.00