Digi International XBP24BZ7WIT-004J ZigBee Module +10dBm -102dBm ADC, DIO, UART Serial, WPAN 2.7 → 3.6V 32.94 x

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

XBee-PRO ZigBee RF Module

The XBee-PRO ZigBee RF module operates in the 2.4GHz ISM Band and allows the formation of a mesh network. With its high power output and high receiver sensitivity it can provide long-range line-of-sight communication for up to 2 miles.

Carrier frequency: 2.4GHz ISM band with 15 channels
RF Power Output: +18dBm
Receiver Sensitivity: -102dBm @ 1% PER
Interference control: Direct Sequence Spread Spectrum (DSSS), Packet Retry/Acknowledgement
OTA Date Rate: up to 250kbps
Host communication: serial UART with RTS/CTS flow control, SPI
Programmable version contains an MC9S08QE32 microcontroller
Supported network topologies: Point-to-Point, Point-to-Multipoint, Peer-to-Peer & Mesh
Protocol: ZigBee PRO 2007, HA-Ready with support for binding/multicasting
AES-128 encryption
4 channel 10-bit ADC
15 x GPIO pins
Power supply: +2.1V to +3.6Vdc
Operating temperature range: -40 to +85°C
Dimensions: 22 x 34 x 3mm DIP format
Applications: Wireless sensor networks, long-range communication for the Internet of Things (IoT)

RS Product Codes
135-9737 XBP24CZ7UIS-004 Standard, U.FL antenna
135-9738 XBP24CZ7UIT-004 Standard, U.FL antenna
135-9739 XBP24CZ7WIT-004 Standard, Wire antenna
719-3803 XBP24BZ7PIT-004J Standard, PCB antenna
719-3828 XBP24BZ7PITB003J Programmable, PCB antenna
719-3812 XBP24BZ7SIT-004J Standard, RPSMA connector
719-3821 XBP24BZ7SITB003J Programmable, RPSMA connector
719-3815 XBP24BZ7UIT-004J Standard, U.FL connector
719-3825 XBP24BZ7UITB003J Programmable, U.FL connector
719-3819 XBP24BZ7WIT-004J Standard, Whip antenna
719-3834 XBP24BZ7WITB003J Programmable, Whip antenna

Note

An XBee-PRO ZigBee Development Kit is available under RS Part No. 719-3837

Approvals

FCC, C-TICK

Specifications
Attribute Value
Maximum Output Power +10dBm
Receiver Sensitivity -102dBm
Supported Bus Interfaces ADC, DIO, UART
Supported Network Interfaces Serial, WPAN
Supply Voltage 2.7 → 3.6V
Dimensions 32.94 x 24.38 x 2.82mm
Height 2.82mm
Length 32.94mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 24.38mm
Available to back order for despatch when stock is available
Price Each
£ 25.54
(exc. VAT)
£ 30.65
(inc. VAT)
Units
Per unit
1 - 1
£25.54
2 - 4
£25.06
5 +
£24.75
Packaging Options:
Related Products
The ATSAMR21B18-MZ210PA is a 19.7mm x 16.3mm wireless ...
Description:
The ATSAMR21B18-MZ210PA is a 19.7mm x 16.3mm wireless module. It integrates an ATSAMR21E18 IC together with a serial data FLASH. The design allows a variety of mounting positions with SMT as well as TH mounting. The extended temperature range with operation up to 125°C is a distinguishing feature. ATSAMR21 Single-chip ...
The QFM-TRX1-24G is a radio telemetry transceiver module ...
Description:
The QFM-TRX1-24G is a radio telemetry transceiver module operating in the 2.4GHz ISM frequency band. It is based on the Texas Instruments CC2500 transceiver device. RF Carrier Frequency: 2400MHz to 2483MHz ISM Band RF Output Power: up to +1d BmReceiver Sensitivity: -104d Bm @ 2400bps Modulation: FSK, GFSK or OOKOptional ...
The Espressif ESP-WROOM-S2 is a low-power 32-bit MCU ...
Description:
The Espressif ESP-WROOM-S2 is a low-power 32-bit MCU Wi Fi module. This small SMD module integrates the ESP8266EX Wi Fi chip and is designed for optimal RF performance. The ESP-WROOM-02 enables you to evaluate and further develop the device for you chosen application.This module features a low-power mode. ESP-WROOM-02 operated ...
The PAN9420 is a 2.4 GHz ISM band ...
Description:
The PAN9420 is a 2.4 GHz ISM band Wi-Fi-embedded module which includes a wireless radio and an MCU for easy integration of Wi-Fi connectivity into various electronic devices. Fully embedded: integrated full-featured network stack Contains all necessary IoT functionality (Place & Play)Integrated webserver with AJAX/JSON for web applications No stack ...