Neutrik Cable Mount XLR Connector, Male, 50 V, 5 Way, Silver Plating
- RS Stock No.:
- 534-5487
- Mfr. Part No.:
- NC5MXD25
- Brand:
- Neutrik
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 534-5487
- Mfr. Part No.:
- NC5MXD25
- Brand:
- Neutrik
Specifications
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Neutrik | |
| Number of Contacts | 5 | |
| Gender | Male | |
| Mounting Type | Cable Mount | |
| Body Orientation | Straight | |
| Colour | Natural | |
| Contact Plating | Silver | |
| Housing Material | Zinc | |
| Termination Method | Solder | |
| Current Rating | 7.5A | |
| Voltage Rating | 50 V | |
| Contact Material | Brass | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +80°C | |
| Select all | ||
|---|---|---|
Brand Neutrik | ||
Number of Contacts 5 | ||
Gender Male | ||
Mounting Type Cable Mount | ||
Body Orientation Straight | ||
Colour Natural | ||
Contact Plating Silver | ||
Housing Material Zinc | ||
Termination Method Solder | ||
Current Rating 7.5A | ||
Voltage Rating 50 V | ||
Contact Material Brass | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +80°C | ||
- COO (Country of Origin):
- GB
Neutrik XLR Connector
The Neutrik X series male XLR connector has 5-pole with silver over Nickle-plating. It has a current rating of 7.5A with a voltage rating of 50V. It has a compact design with sturdy die-cast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all the cables. This product has dual-use terminals, which can either be soldered or crimped for increased choice and ease of connectivity.
Warning:
Not to be used as mains connectors.
Warning:
Not to be used as mains connectors.
Features and Benefits
Boot with rubber gland gives high protection against bending stress
Coloured rings and boots available for coding and marking
Parts are polarised and securely fitted, thereby eliminating connector noise
Rugged zinc die cast shell, long lasting and durable
Connector bodies is die-cast zinc/aluminium
Insulator is polyester/nylon
Test voltage: 1500VAC
Contact resistance is ≤3mohm
Insertion force is ≤20N
Withdrawal force is ≤20N
Insulation resistance is ≥109ohm
Operating temperature ranging between -30°C and 80°C
Coloured rings and boots available for coding and marking
Parts are polarised and securely fitted, thereby eliminating connector noise
Rugged zinc die cast shell, long lasting and durable
Connector bodies is die-cast zinc/aluminium
Insulator is polyester/nylon
Test voltage: 1500VAC
Contact resistance is ≤3mohm
Insertion force is ≤20N
Withdrawal force is ≤20N
Insulation resistance is ≥109ohm
Operating temperature ranging between -30°C and 80°C
Certifications
IEC 61076-2-103
IEC 68-2-20
IP40 rated
UL approved
UL 94 HB approved
IEC 68-2-20
IP40 rated
UL approved
UL 94 HB approved
Alternative product: 166-456