The XBee OEM RF module is IEEE 802.15.4 compliant and operates in the 2.4GHz ISM Band. With its high receiver sensitivity it can provide long-range line-of-sight communication for up to 100m.

Carrier frequency: 2.4GHz ISM band with 16 channels
RF Power Output: 0dBm
Receiver Sensitivity: -92dBm @ 1% PER
Interference control: Direct Sequence Spread Spectrum (DSSS)
OTA Date Rate: up to 250kbps
Host communication: serial UART with RTS/CTS flow control
Supported network topologies: Point-to-Point, Point-to-Multipoint & Peer-to-Peer
Source/Destination Addressing
Unicast & Broadcast Communications
AES-128 encryption
Antenna: Integral Whip ( RS 102-721), External via U.FL (RS 102-709), PCB (RS 761-7403)
6 channel 10-bit ADC
8 x GPIO pins
Power supply: +2.8V to +3.4Vdc
Operating temperature range: -40 to +85°C
Dimensions: 24.4 x 27.6 x 7mm DIL format
Applications: Wireless sensor networks, long-range communication for the Internet of Things (IoT)

FCC, IC, ETSI

XBee 802.15.4 OEM RF module is an embedded solution providing wireless end-point connectivity to devices. The module uses the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. This module is designed for high-throughput applications requiring low latency and predictable communication timing.
1 mV power output and at a range of 0 – 90m.