The Texas Instruments LM1086 is a regulator with a maximum dropout of 1.5 V at 1.5 A of load current. The device has the same pin-out as TI’s industry standard LM317.
Two resistors are required to set the output voltage of the adjustable output voltage version of the LM1086. Fixed output voltage versions integrate the adjust resistors. Typically, no input capacitor is needed unless the device is situated more than 6 inches from the input filter capacitors. Output capacitor can be replaced with ceramic and appropriate ESR.

Available in Fixed 1.8-V, 2.5-V, 3.3-V, 5-V
Available in Adjustable Version
Current Limiting and Thermal Protection
2% Output Accuracy
Output Current 1.5 A
Line Regulation 0.015% (Typical)
Load Regulation 0.1% (Typical)
Maximum Input Voltage up to 29V
Minimum Adjustable Output Voltage Down to 1.25V
Stable with Ceramic Output Capacitor with ESR
Temperature Range : -40°C to 125°C