Cypress Semiconductor CY7C63803-SXC, USB Controller, 1.5Mbps, USB 2.0, 4 to 5.5 V, 16-Pin SOIC
- RS Stock No.:
- 194-8839
- Mfr. Part No.:
- CY7C63803-SXC
- Brand:
- Cypress Semiconductor
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 194-8839
- Mfr. Part No.:
- CY7C63803-SXC
- Brand:
- Cypress Semiconductor
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Cypress Semiconductor | |
| Number of Transceivers | 1 | |
| Data Rate | 1.5Mbps | |
| Protocols Supported | USB 2.0 | |
| IC Type | Controller IC | |
| Power Supply Type | Single | |
| Typical Single Supply Voltage | 4 to 5.5 V | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 16 | |
| Dimensions | 11.76 x 7.62 x 2.54mm | |
| Height | 2.54mm | |
| Length | 11.76mm | |
| Maximum Operating Temperature | +70 °C | |
| Minimum Operating Temperature | 0 °C | |
| Width | 7.62mm | |
| Select all | ||
|---|---|---|
Brand Cypress Semiconductor | ||
Number of Transceivers 1 | ||
Data Rate 1.5Mbps | ||
Protocols Supported USB 2.0 | ||
IC Type Controller IC | ||
Power Supply Type Single | ||
Typical Single Supply Voltage 4 to 5.5 V | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 16 | ||
Dimensions 11.76 x 7.62 x 2.54mm | ||
Height 2.54mm | ||
Length 11.76mm | ||
Maximum Operating Temperature +70 °C | ||
Minimum Operating Temperature 0 °C | ||
Width 7.62mm | ||
Crystalless oscillator with support for an external clock, eliminates the need for an external crystal or resonator.
Configurable I/O for real world interface without external components
Conforms to USB Specification, Version 2.0
Conforms to USB HID Specification, Version 1.1
Supports one low speed USB device address
Supports one control endpoint and two data endpoints
Harvard architecture
Interface can auto configure to operate as PS/2 or USB
No General Purpose I/O (GPIO) pins required to manage dual mode capability
Each GPIO port supports high impedance inputs, configurable pull-up, open drain output, CMOS/TTL inputs, and CMOS output
Maskable interrupts on all I/O pins
Master or slave operation
Supports half duplex single data line mode for optical sensors
Capture timer registers store both rising and falling edge times.
Separate registers for rising and falling edge capture
Simplifies the interface to RF inputs for wireless applications
Periodic wakeup with no external components
Watchdog timer (WDT)
Configurable I/O for real world interface without external components
Conforms to USB Specification, Version 2.0
Conforms to USB HID Specification, Version 1.1
Supports one low speed USB device address
Supports one control endpoint and two data endpoints
Harvard architecture
Interface can auto configure to operate as PS/2 or USB
No General Purpose I/O (GPIO) pins required to manage dual mode capability
Each GPIO port supports high impedance inputs, configurable pull-up, open drain output, CMOS/TTL inputs, and CMOS output
Maskable interrupts on all I/O pins
Master or slave operation
Supports half duplex single data line mode for optical sensors
Capture timer registers store both rising and falling edge times.
Separate registers for rising and falling edge capture
Simplifies the interface to RF inputs for wireless applications
Periodic wakeup with no external components
Watchdog timer (WDT)