Bidirectional Transient Voltage Suppressor diodes with 400W peak pulse capacity in compact DO214AB (SMB) surface mount packages.

The Bourns DO-214AC package, surface mount bidirectional TVS diode has a stand-off voltage of 36V and reverse breakdown voltage of 44.2V. It has a maximum peak pulse current rating of 40A.

• Built-in strain relief
• Easy to handle with standard pick and place equipment
• EFT protection of data lines
• ESD 30kV (Air), 30kV (Contact)
• ESD protection of data lines
• Excellent clamping capability
• Fast response time, typically less than 1.0ps from 0V to VBR min
• For surface mounted applications to optimize board space
• Glass passivated junction
• Halogen and lead free component
• High temperature to reflow soldering guaranteed: 260°C/40sec
• Low inductance
• Low profile package
• Meet MSL level1, LF maximum peak of 260°C
• Operating junction temperature ranges between -65°C and 150°C
• Peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01%
• Solderable matte tin-plated lead terminals
• The typical failure mode is short from over-specified voltage or current
• Typical IR less than 1μA when VBR minimum >12V

• Automotive
• Computers industries
• Consumer electronics
• I/O interfaces
• Overvoltage transient protection
• VCC bus, vulnerable circuits in telecommunication industry

• e3
• IEC 61000-4-4
• IEC-61000-4-2
• IPC/JEDEC J-STD609A.01
• JESD22-B102
• J-STD-020

Transient Voltage Suppressors, Bourns Electronics