Honeywell Toggle Switch, Bushing Mount, On-On, SPDT, Screw Terminal, 277 V ac

This toggle switch provides a manual two-position changeover mechanism intended for industrial control panels and equipment that require a simple on–on selection. It is designed for panel installation with a threaded bushing mounting style and utilises screw‑type terminations for secure wiring in electrical and automation assemblies.

• SPDT contact arrangement enabling single‑pole changeover functionality
• Rated for 15 A current to handle higher load circuits
• Contact voltage capability up to 277V AC for mains applications
• Temperature range from −40 to 71 °C for varied environment operation
• IP68, IP67 ingress protection for exposure to water and dust
• Meets CSA, UL, CE approvals for regulated installations

• Suitable for control panels in factory automation systems
• Ideal for switching mains‑fed actuator circuits
• Used with distribution equipment requiring manual changeover
• Can be used for marine or outdoor enclosures needing ingress protection
• Suitable for maintenance panels where screw terminals simplify rewiring

The panel cut‑out dimension required for fitting the threaded bushing is 12.4 mm, allowing a secure panel mount.

The actuator extends 17 mm, providing a tactile lever length that aids operator access through small panel apertures.

Screw terminals are provided to permit standard cable lugs or stranded conductors to be clamped reliably.

The switch has a body depth and overall width requiring approximately 33.5mm lateral clearance and 22mm from front to rear envelope for mounting considerations.