Schneider Electric DIN Rail Mount Timer Relay, 18 → 30V, 1-Contact, 0 → 10s, 1-Function, SPDT
- RS Stock No.:
- 828-2963
- Mfr. Part No.:
- 831VS-24D
- Brand:
- Schneider Electric
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 828-2963
- Mfr. Part No.:
- 831VS-24D
- Brand:
- Schneider Electric
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Schneider Electric | |
| Supply Voltage | 18 → 30V | |
| Mounting Type | DIN Rail | |
| Mode of Operation | Monitoring and Reacting to Over and Under Voltage | |
| Time Range | 0 → 10s | |
| Number of Contacts | 1 | |
| Number of Timer Functions | Single | |
| Contact Configuration | SPDT | |
| Time Increment | Seconds | |
| Maximum Voltage | 30V | |
| Terminal Type | Screw | |
| Switch Configuration | SPDT | |
| Minimum Voltage | 18V | |
| Width | 17.6mm | |
| Power Supply | External | |
| Depth | 65mm | |
| Maximum Operating Temperature | +55°C | |
| Length | 90mm | |
| Contact Material | Silver Alloy | |
| Time Delay | 0 → 10s | |
| Minimum Operating Temperature | -20°C | |
| Select all | ||
|---|---|---|
Brand Schneider Electric | ||
Supply Voltage 18 → 30V | ||
Mounting Type DIN Rail | ||
Mode of Operation Monitoring and Reacting to Over and Under Voltage | ||
Time Range 0 → 10s | ||
Number of Contacts 1 | ||
Number of Timer Functions Single | ||
Contact Configuration SPDT | ||
Time Increment Seconds | ||
Maximum Voltage 30V | ||
Terminal Type Screw | ||
Switch Configuration SPDT | ||
Minimum Voltage 18V | ||
Width 17.6mm | ||
Power Supply External | ||
Depth 65mm | ||
Maximum Operating Temperature +55°C | ||
Length 90mm | ||
Contact Material Silver Alloy | ||
Time Delay 0 → 10s | ||
Minimum Operating Temperature -20°C | ||
RoHS Status: Not Applicable
- COO (Country of Origin):
- MA
831 Series
The 831 voltage sensor is a single-phase ac voltage device that is capable of monitoring and reacting to over and under voltage conditions. This product is designed to be wired across terminals A1 and A2 with the voltage that is being monitored. The two LED lamps indicate both when the input voltage is present (green LED) and also when the output is energised (red LED). The Umax dial is used to set the upper trip-point for the voltage sensor. The Umin dial is a percentage of the Umax dial and is used to delay the transfer of the contacts, from 0 to 10 seconds, when a set point has been violated.
3-state indication LEDs
Timing dial
DIN mountable
17.5 mm wide
Timing dial
DIN mountable
17.5 mm wide