- RS Stock No.:
- 504-004
- Brand:
- RS PRO
- RS Stock No.:
- 504-004
- Brand:
- RS PRO
Technical Reference
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Chassis Mount, Clamp Construction, 230Vac, 6V to 50V
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.
Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742
Note
2 terminal shrouds required per transformer
Standards
BS3535; EN 60 742
Specifications
Attribute | Value |
---|---|
Accessory Type | Shroud |
For Use With | 12 VA Transformer, 20 VA Transformer |
Overall Depth | 0.45in |
Overall Length | 1.53in |
Material | Glass Reinforced Nylon |
Overall Dimensions | 1.53 x 0.775 x 0.45in |
Overall Width | 0.775in |
Related links
- EPCOS, Vertical Coil Former for use with PQ 32 x 20 Core
- EPCOS, Horizontal Coil Former for use with E 20/10/6 Core
- EPCOS, Horizontal Coil Former for use with EP 20 Core
- EPCOS, Yoke Clamp Clip for use with ETD 39/20/13 Core
- Block, E 70 for use with FS-1E-7064-00
- Block, E 36 for use with FS-1E-36
- RS PRO, Shroud for use with 6 VA Transformer
- EPCOS, EFD 20/10/7 Coil Former for use with EFD 20/10/7 Core