Honeywell Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

View this category
Unavailable
RS will no longer stock this product.
RS Stock No.:
169-7678
Mfr. Part No.:
HIH-4000-003
Brand:
Honeywell
Find similar products by selecting one or more attributes.
Select all

Brand

Honeywell

Sensor Function

Humidity Sensor

Output Type

Analogue

Interface Type

Analogue

Accuracy

±3.5%RH

Mounting Type

Through Hole

Pin Count

3

Minimum Operating Temperature

-40 °C

Operating Temperature Range

-40 to +85 °C

Maximum Operating Temperature

+85 °C

Minimum Operating Supply Voltage

4 V

Maximum Operating Supply Voltage

5.8 V

Package Type

SIP

Length

21.66mm

Height

2.03mm

Width

4.27mm

Dimensions

21.66 x 4.27 x 2.03mm

COO (Country of Origin):
MX

Honeywell Humidity Sensor, -40 to +85°C, ±3.5% Accuracy - HIH-4000 Series - HIH-4000-003


Choose this humidity sensor from Honeywell to check the concentration of moisture in your environment. Its analogue output provides RH (relative humidity) readings with an accuracy of ±3.5%, ensuring precise data. The component's broad operating humidity range of 0 to 100%RH makes it suitable for use in dry and wet environments. Thanks to its low current draw of 200μA, the sensor is suitable for use in situations where there are limitations on power usage, such as in battery-powered applications.

Features & Benefits


• Solderable SIP (single in-line package) design for ease of installation

• Layered thermoset plastic housing for protection against impact and heat

• Wide operating temperature range between -40°C and +85°C for use in harsh environments

• Quick response time of 5s to ensure fast results

Applications


• Heating and ventilation systems

• OEM (original equipment manufacturer) sector

• Haulage and logistics industries

Where should I place this sensor during installation?


For best results, position the sensor's face towards the atmosphere you want to monitor. Ensure that the sensor is kept away from harsh light during use.

HIH-4000/4020/4021 Series Humidity Sensors, Honeywell


The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA.

Potential Applications:

Refrigeration equipment

HVAC equipment

Medical equipment

Drying

Meteorology

Battery-powered systems

OEM assemblies

Features:

Moulded thermoset plastic housing

Near linear voltage output vs %RH

Laser-trimmed interchangeability

Enhanced accuracy, fast response

Fast response time

Stable, low drift performance

Chemically resistant

Temperature & Humidity Sensors, Honeywell


Related links