Jumo di 08 On/Off Temperature Controller, 96 x 48mm, Current, RTD, Thermocouple, Voltage Input, 110 → 240 V ac

The Jumo di 08 series digital indicator has a supply voltage rating ranging from 110VAC to 240VAC. This indicator has a length of 96mm and width of 48mm. The configurable analogue input permits the direct connection to thermocouples, RTD temperature probes, resistance transmitters, potentiometers, or transducers with a standard signal. The plug-in screw terminals establish the electrical connection. It is used for displaying measurements and monitoring limit values in industrial applications.
LED/LCD digital voltage and current meters:
All meters have an operating temperature range from 0°C to 50°C.

LED display is 4mm wide and 20mm long for (di 08) digits
2 alarm thresholds for monitoring limit values
Programmable time-delayed switching for each relay
Minimum and maximum and hold functions via an external contact
Customer-specific linearization correction
2 limit comparators for limit monitoring
Time-delayed switching, programmable per relay
Switch-on delay after power-on is programmable

IP66 rated (front protection)
IP20 rated
EN 61326-1
Class B
EN 61010-1
EN 60529