TRACOPOWER Surface Mount Switching Regulator, ±12V dc Output Voltage, 13.5 → 42 V dc, 7 → 24 V dc Input

  • RS Stock No. 755-3453
  • Mfr. Part No. TSRN 1-24120SM
  • Warranty 3 Year
  • Brand TRACOPOWER
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Traco 1A SMD Step Down Switching Regulator - TSRN-1SM Series

TSRN-1SM series step-down switching regulators with a wide input voltage range of up to 42 Vdc and a high efficiency of up to 95% which allows full load operation without the need for a heatsink or forced air cooling. These TSRN-1SM series 1A step-down switching regulators are suitable for positive and negative output circuits (see table for additional data) and have trim input for output voltage adjustment. A low standby power consumption and high efficiency makes these switching regulators ideal for use in energy saving applications.

Compact SMD package
Input voltage range up to 42 VDC
Built in filter capacitors
No heat-sink required
Adjustable output voltage
Low standby current: Positive output circuit: 1.5 mA for stock number 755-3447, 4 mA for all other models. Negative output circuit: -3.3 / -5.5 V models: 3 mA, -9.0 / -12 V models: 7 mA and 10 mA for stock number 755-3457
Excellent line and load regulation
Over-temperature and short circuit protection
Remote On/Off input
Moisture sensitivity level (MSL) 1

Note

MTBF: MIL-HDBK-217F @ +25°C
Derating: 1.7 %/K above +55°C (positive circuit)
Derating: 2.5 %/K above +65°C (negative circuit)
For input voltage higher than 36 Vdc an input capacitor 22 μF/ 50 V is required
Load regulation is shown at 0-100 %, for 10-90% the load regulation would be 0.3 %

Specifications
Attribute Value
Input Voltage 7 → 24 V dc, 13.5 → 42 V dc
Output Voltage ±12V dc
Number of Outputs 1
Output Current 1 A, 300 mA
Mounting Type Surface Mount
Package SMD
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 86 %, 91 %
MTBF 6000000h
Load Regulation ±0.6%
Line Regulation ±0.2%
Ripple And Noise 75mV Pk-Pk
Length 15.2mm
Weight 1.7kg
Depth 7.2mm
Width 9.3mm
32 In stock for FREE next working day delivery
Price Each
£ 9.27
(exc. VAT)
£ 11.12
(inc. VAT)
Units
Per unit
1 - 4
£9.27
5 - 9
£8.99
10 - 24
£8.71
25 - 49
£8.34
50 +
£7.97
Packaging Options:
Related Products
R1Z series 1W single output, SMD, regulated DC-DC ...
Description:
R1Z series 1W single output, SMD, regulated DC-DC converters designed for isolating or converting DC power rails where an SMD format with regulated output is required. Miniature design RegulatedUL94V-0 package material High temperature operation Toroidal Magnetics No load power consumption: 217mW typically.
The FAN48685 is a low−power boost regulator designed ...
Description:
The FAN48685 is a low−power boost regulator designed to provide a minimum voltage−regulated rail from a standard single−cell Li−Ion battery and advanced battery chemistries. Even below the minimum system battery voltage, the device maintains the output voltage regulation for an output load current of 800 mA. The combination of built−in ...
Ultra-Small: Requires Only Three Ceramic Capacitors No Inductors ...
Description:
Ultra-Small: Requires Only Three Ceramic Capacitors No Inductors Required Up to 125mA Output Current Regulated ±3% Output Voltage1MHz Switching Frequency1.8V to 5.5V Input Voltage220μA Quiescent Current0.1μA Shutdown Current Load Disconnect in Shutdown Applications3.3V to 5V Local Conversion Applications3V to 5V GSM SIMM Cards Backup Battery Boost Converters Battery-Powered Applications Flash ...
90% Efficiency for 30mA to 2A Load Currents ...
Description:
90% Efficiency for 30mA to 2A Load Currents Up to 24W Output Power110μA (max) Supply Current5μA (max) Shutdown Current2V to 16.5V Input Range Preset 12V or Adjustable Output Voltage Current-Limited PFM Control Scheme Up to 300k Hz Switching Frequency Evaluation Kit Available Applications Battery-Powered Applications Flash Memory Programming High-Power RF ...