Murata Power Solutions Non-Isolated DC-DC Converter, 12V dc Input, 5V dc Output, 1.5A

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Murata Power Solutions Non-Isolated DC-DC Converter

The Murata Power Solutions Non-Isolated DC-DC Converter is used for the embedded application. It has three nominal output voltage terminals and up to 1.5A is the maximum output. Based on fixed frequency the high efficiency means very low heat and low electrical noise requiring no external component. The fixed single output converters provide both tight regulation and high efficiency directly at power usage site and are direct plug-in instead of linear regulators hence no extra outside component is required

Features and Benefits

• High efficiency with no external components
• No heat sink direct replacement for 3-terminal
• Operating temperature is from -40°Cto 85°C
• Outstanding thermal derating performance
• Short circuit protection
• Vertical SIP or horizontal mount, small footprint, in an encapsulated package

Applications

• Control boxes
• Control boxes
• ITE commercials
• ITE commercials

Certifications

• UL certified

Specifications
Attribute Value
Input Voltage 12V dc
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package TO-220
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 90.5%
MTBF 78700000h
Load Regulation ±0.4
Line Regulation ±0.3%
Ripple And Noise 75mV Pk-Pk
Weight 4.5g
Allowed Circuit Configurations Parallel
Power Signal Conversion Type DC-DC
Switching Frequency Range 500kHz
Rated Output Power 7.5W
Series OKI-78SR
Protection Features Short Circuit Protection
Maximum Input Current 690mA
Depth 17.6mm
Length 11.9
Width 10mm
Available to back order for despatch 09/03/2020
Price Each (In a Box of 126)
£ 4.69
(exc. VAT)
£ 5.63
(inc. VAT)
Units
Per unit
Per Box*
126 +
£4.69
£590.94
*price indicative
Related Products
The MGJ2 series of DC-DC converters is ideal ...
Description:
The MGJ2 series of DC-DC converters is ideal for powering ’high side’ and ’low side’ gate drive circuits for IGBTs and Mosfets in bridge circuits. A choice of asymmetric output voltages allows optimum drive levels for best system efficiency and EMI. The MGJ2 series is characterised for high isolation and ...
Offering two configurable isolated output voltages of 24V, ...
Description:
Offering two configurable isolated output voltages of 24V, the MGJ6 series of DC-DC converters is ideal for simultaneously powering ’high side’ and ’low side’ gate drive circuits for IGBTs, Silicon and Silicon Carbide Mosfets in half bridge circuits. The MGJ6 series is characterised for high isolation and dv/dt requirements commonly ...
Very high efficiencyWide input voltage rangeNon-isolatedUser-selectable output voltages ...
Description:
Very high efficiencyWide input voltage rangeNon-isolatedUser-selectable output voltages via external resistorsPhased start-up for sequencing and trackingStarts up into pre-biased loadRemote On/Off controlRemote senseLow output noise and rippleUnder voltage lockout, over temperature and continuous short circuit protectionUL94V-0 flammability ratingDOSA industry standard SIP package & pin out.
Non-isolated (PoL) moduleWide input voltage range3A and 5A ...
Description:
Non-isolated (PoL) moduleWide input voltage range3A and 5A output currentsAdjustable output voltage via external resistorsOutput ON/OFF inhibitOutput voltage senseOver temperature and over current protectionDOSA surface mounting package.