Murata Power Solutions Through Hole Non-Isolated DC-DC Converter, 5V dc Output Voltage, 1.5A Output Current

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance

Approvals

UL/EN/IEC 60950-1, 2nd Edition

Specifications
Attribute Value
Output Voltage 5V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 7.5W
Mounting Type Through Hole
Package SIP
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 90.5%
Load Regulation ±0.25%
Line Regulation ±0.25%
Ripple And Noise 75mV Pk-Pk
Width 7.6mm
Weight 2g
Series OKI-78SR
Depth 16.5mm
Length 10.4mm
Available to back order for despatch when stock is available
Price 1 Tray of 100
£ 307.50
(exc. VAT)
£ 369.00
(inc. VAT)
Tray(s)
Per Tray
Per unit*
1 +
£307.50
£3.075
*price indicative
Related Products
Wide 2:1 input voltage range Regulated output1kV input/output ...
Description:
Wide 2:1 input voltage range Regulated output1kV input/output isolation Low profile No heatsink required Internal SMD construction Continuous short circuit protection DIP24 plastic package UL 94V-0 package material.
The Murata MGJ2 series of DC-DC converters is ...
Description:
The Murata MGJ2 series of DC-DC converters is ideal for powering high side and low side gate drive circuits in bridge circuits for IGBTs and Mosfets. These isolated DC-DC converters offer a choice of asymmetric output voltages allowing optimal drive levels for best system efficiency and EMI. The MGJ2 series ...
High efficiency Unregulated output6kV input/output isolation Low profile ...
Description:
High efficiency Unregulated output6kV input/output isolation Low profile No external components required Internal SMD construction DIP24 plastic package UL 94V-0 package material.
Low profile 0.43" industry standard quarter-brick package/pinout2k Vdc ...
Description:
Low profile 0.43" industry standard quarter-brick package/pinout2k Vdc isolation minimum4:1 input voltage range On/off control, trim & sense functions Output overvoltage protection Fully I/O and thermal shutdown protected.