WJ Furse ESP D/TN Series 7.79 V Maximum Voltage Rating 5 kA, 20 kA Maximum Surge Current Twisted Pair Surge Protector,

  • RS Stock No. 198-0418
  • Mfr. Part No. ESP 06D
  • Brand WJ Furse
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

WJ Furse twisted- pair lightning Surge Arrestors - ESP D & TN Series

From WJ Furse, these lightning surge arrestors are designed for use on twisted-pair lines found in process control equipment, modems and communications interfaces. These surge protectors offer full mode protection with very low let through voltage (to BS EN 62305) between all lines. The full mode design allows for the continued operation of protected equipment while also handling partial lightning currents. ESP series surge protectors offer repeated protection in lightning intense environments and are encased within a strong, flame retardant ABS housing.

Features and benefits:

300 mA current rating Low inline resistance
Colour coded terminals
Effective earthing from substantial earth stud
Integral earthing plate for enhanced connection to earth with a CME kit
Supplied ready for flat mounting on the side or on the base
A built-in foot allows for clip-on mounting for top hat DIN Rails
Easy connection of cable screen to earth with screen terminal

Installation:

These surge protectors should be installed closely to the system's earth start point. They should be connected in series with the data communication or signal line close to the equipment that is being protected, such as the control panel. Alternatively, these surge protectors should be installed where the signal line enters or leaves the building. Surge protectors should be installed within a separate enclosure or in an existing enclosure.

Accessories

CME 4 (239-731), WBX 3 (456-8112), WBX 4 (456-8106)

Transient Voltage Suppressors (Data Lines)

Specifications
Attribute Value
Suppressor Type Twisted Pair Surge Protector
Maximum Voltage Rating 7.79 V
Mounting Type DIN Rail
Maximum Surge Current 5 kA, 20 kA
Series ESP D/TN
Length 120mm
Depth 19mm
Height 54mm
Dimensions 120 x 54 x 19mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
52 In stock for FREE next working day delivery
Price Each
£ 75.59
(exc. VAT)
£ 90.71
(inc. VAT)
Units
Per unit
1 - 9
£75.59
10 - 24
£70.31
25 - 49
£63.28
50 - 99
£56.96
100 +
£51.26
Related Products
Combined protector for use on low current (up ...
Description:
Combined protector for use on low current (up to 5 or 16 A) single phase systems to protect connected electronic equipment from transient overvoltages on the mains supply, e.g. fire/intruder alarm panels. Protectors with /BX suffix come ready-boxed for use in dirty or damp environments. Repeated protection in lightning intense ...
Combined Category C, B tested protector suitable to ...
Description:
Combined Category C, B tested protector suitable to protect Cable. For use on lines running within buildings at boundaries up to LPZ 1 to through to LPZ 3 to protect sensitive electronic equipment. Very low let-through voltage between all lines - Full Mode protection Low attenuation and high return loss ...
The ABB OVR series surge suppressor unit is ...
Description:
The ABB OVR series surge suppressor unit is a protective device to ensure that electrical equipment is not damaged by a sudden voltage spike. It has an electrical rating of 5V and 10kA. It is a combined category D, C, B tested protector suitable to protect twisted pair Ethernet networks, ...
Over Voltage protectors for low current mains power ...
Description:
Over Voltage protectors for low current mains power supplies to protect electronic equipment e.g. CCTV cameras, alarm panels and telemetry equipment. Very low let-through voltage between all lines (L-E, L-N, N-E)Sturdy housing with M6 earth stud Removable DIN rail foot for easy installation (unboxed versions). Can also be flat-mounted.IP66 rated ...