Applied Motion Systems ST5-S Stepper Motor Controller 5 A, 24 → 48V dc, 3.65 x 3 x 1.125in

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

ST5-S and ST10-S Stepper Drive

ST5-S and ST10-S step drives offer the following features:

Pulse and direction
CW/CCW pulse
A/B quadrature
Analogue velocity (oscillator) mode
Host commands (SCL compatible)
SiNet hub (HUB 444, stock no. 455-867) compatible
ST Configurator software for setup (software included)

Specifications
Attribute Value
For Motor Type Bipolar
Current Rating 5 A
Board Supply Voltage 24 → 48V dc
Overall Length 3.65in
Overall Width 3in
Overall Depth 1.25in
3 In stock for FREE next working day delivery
Price Each
£ 375.48
(exc. VAT)
£ 450.58
(inc. VAT)
Units
Per unit
1 +
£375.48
Related Products
The PCU D10 display and control panel connects ...
Description:
The PCU D10 display and control panel connects by two wires to the APM110E as a remote display repeater and programming module. Supply voltage 10 Vdc from APM110EAnalogue output 4-20mA16 LEDs for indicate the unitIP54 protectionPanelmountingCut out 68x68 mmFor use with the APM110E load monitor (Stock-no.: 793-4109).
ST5-Si and ST10-Si programmable step drives offer the ...
Description:
ST5-Si and ST10-Si programmable step drives offer the following features:. Software setup using ST Configurator (software included)Microstepping 200 to 58000 steps/rev.Pulse and direction: pulse/direction, CW/CCW, A/B quadratureHost control modeIdle current reductionAnti-resonanceTorque ripple smoothingMicrostep emulation8 digital inputs4 digital outputsMay be fitted with option boards to provide an encoder feedback option (ST-ENC, ...
Drives motors up to 40V at 3.5AAdjustable drive ...
Description:
Drives motors up to 40V at 3.5AAdjustable drive current settings from 0.5 to 3.5AOutput overload protectionSynchronisation output for multi-axis systemsFull and half step drive modesTTL & CMOS compatible control interfaceOutput disable input5 & 12Vdc auxiliary outputs for external device energisationStatus LED's for condition monitoringProvision for assembling on-board oscillator with ramp, ...
Drives motors up to 85V and 6A/phaseOn board ...
Description:
Drives motors up to 85V and 6A/phaseOn board output drive current setting (2.5 to 6.0A)High efficiency chopped constant current power stage provides increased performance and reduced current consumptionSingle supply rail simplifies power supply requirementsShort-circuit and open circuit protected stage for increased reliabilitySelectable full or half step phase logicOver temperature monitor ...