Aim-TTi PSA2702 Handheld Spectrum Analyser, 30 MHz → 1.8 GHz

View all Spectrum Analysers
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.

Alternative

This product is not currently available. Here is our alternative recommendation.

presentation
Aim-TTi PSA2703USC Handheld Spectrum Analyser, 2.7GHz
RS Stock No.
238-4076

Each

£1,511.97

(exc. VAT)

£1,814.36

(inc. VAT)

RS Stock No.:
787-7683
Mfr. Part No.:
PSA2702USC
Brand:
Aim-TTi
Find similar products by selecting one or more attributes.
Select all

Brand

Aim-TTi

Bandwidth

30 MHz → 1.8 GHz

Number of Channels

1

Wave Traces

Live, Reference, View

Sweep Modes

Continuous, Single

Setting Modes

Centre + Span, Start + Stop

Maximum Frequency

2.7GHz

Minimum Frequency

1 MHz

Frequency Stability

±10ppm

Display Type

4.3 in TFT

Screen Size

480 x 272pixel

Markers

Dual, Single

RF Input

SMA Connector

Interface Type

USB

Desktop/Handheld

Handheld

Length

92mm

Width

49mm

Maximum Operating Temperature

+40°C

Battery Type

Lithium-ion

Weight

560g

Battery Life

8 h

Model Number p

PSA2702

Height

192mm

Minimum Operating Temperature

+5°C

Dimensions

92 x 49 x 192mm

RoHS Status: Exempt

COO (Country of Origin):
GB

Aim-TTi Spectrum Analyser


The Aim-TTi single-channel spectrum analysers operate on the frequency ranging from 1MHz to 2.7GHz. It a high-performance, portable, cost-efficient, lightweight and handy instrument which incorporates extensive feature sets. This model is an extended variant of PSA2702 which include the firmware upgrade U01, a travel case, telescopic antenna and car charger. The firmware upgrade is pre-installed and all of the accessories, including the antenna and car charger, are supplied inside the fitted case. This analyser operates on a Li-ion rechargeable battery which can provide more than 8 hours of continuous operation (for continuous bench top operation it can be powered from its AC adaptor, which also recharges batteries in less than 3 hours). This instrument can be used vertically, horizontally or using the tilt stand at an angle. The tilt stand can be unclipped from the back of the instrument and attached at the front to protect the screen during transport or act as a sun Shield when viewing conditions are difficult. It has a robust rubberised buffer on top and bottom of the instrument which facilitates use on the field.
Supplied with
Universal voltage mains adaptor/charger, USB connection lead, spare stylus, BNC converter for trigger input, multi-language Short Guide, full users' manual (English only), support CD containing PDF versions of manuals and support software, Firmware Upgrade PSA-U01 (installed), telescopic antenna WB-ANT, vehicle charger PSA-VC and travel case PSA2-SC.

Features and Benefits


Typical noise floor is -96dBm at -20dBm reference level
4.3in TFT colour display
Measurement in different units like dBm or dBμV, mV or μW
Zero span mode with AM and FM audio demodulation
Trace modes of normal, peak hold and trace average
Live, View and Reference traces in contrasting colours
Twin markers with readout of absolute and difference values
Smart marker movement with selectable peak tracking
Frequency presets and independent state storage
Auto-find automatically sets sweep parameters for the highest signal found
Unlimited storage for waveforms, set-ups and screens
User-assignable file names, file stamping from real-time clock
USB interfaces for Flash drives and PC connection
Comprehensive status and context-sensitive help screens
More than 8 hours continuous operation from a charge
Smaller and lighter than standard spectrum analysers
Length is 92mm, width is 49mm and height is 192mm

Applications


Telecommunication
Electronics laboratories
Educational institutes
Electronics designing
Service and maintenance

Certifications


EN61010-1
EN61326