Burkert Solenoid Valve 221756, 2 Port, NC DN 10 to 65 mm, 110V ac
- RS Stock No.:
- 804-2015
- Mfr. Part No.:
- 221756
- Brand:
- Burkert
Image representative of range
Subtotal (1 unit)*
£390.87
(exc. VAT)
£469.04
(inc. VAT)
FREE delivery for orders over £60.00
In Stock
- Plus 6 unit(s) shipping from 04 May 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £390.87 |
*price indicative
- RS Stock No.:
- 804-2015
- Mfr. Part No.:
- 221756
- Brand:
- Burkert
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Burkert | |
| Supply Voltage | 110V ac | |
| Product Type | Solenoid Valve | |
| Number of Ports | 2 | |
| Inlet Port Size | DN 10 to 65 mm | |
| Default Valve Position | NC | |
| Orifice Diameter | 40mm | |
| Body Material | Stainless Steel, Brass, Nickel Plated Brass | |
| Application | Vacuum Application | |
| Series | 221 | |
| Maximum Operating Pressure | 10 bar | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 120°C | |
| Standards/Approvals | IP65 | |
| Servo Assist | Yes | |
| Hazardous Area Certification | explosion protection Ex-i (intrinsically safe) | |
| Flow Factor Kv | 30m³/h | |
| Maximum Opening Time | 4s | |
| Maximum Closing Time | 4s | |
| Select all | ||
|---|---|---|
Brand Burkert | ||
Supply Voltage 110V ac | ||
Product Type Solenoid Valve | ||
Number of Ports 2 | ||
Inlet Port Size DN 10 to 65 mm | ||
Default Valve Position NC | ||
Orifice Diameter 40mm | ||
Body Material Stainless Steel, Brass, Nickel Plated Brass | ||
Application Vacuum Application | ||
Series 221 | ||
Maximum Operating Pressure 10 bar | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 120°C | ||
Standards/Approvals IP65 | ||
Servo Assist Yes | ||
Hazardous Area Certification explosion protection Ex-i (intrinsically safe) | ||
Flow Factor Kv 30m³/h | ||
Maximum Opening Time 4s | ||
Maximum Closing Time 4s | ||
DS6213-EV Series 2/2 Brass Solenoid valve
Burkerts new range of 2 way normally closed solenoid valves. Manufactured from brass and designed for use with water and inert liquids and gases. A soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision engineered main body path helps ensure quiet, water hammer free operation.
Suitable for a diverse range of applications including compressed air and vacuum systems, heating and refrigeration, water treatment and swimming pool technology. Compact size to aid installation when space is limited
0-10 bar operating pressure
0.1-4 second response time
Opens without differential pressure
Minimum pressure differential of 0.5 bar for full opening
High flow rate
Sealed coil
IP65 Rating
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
Note
Due to their internal complexity these valves can only be used with clean neutral media
Electrical connector can be ordered separately
Electrical connector can be ordered separately