EMERSON – ASCO Solenoid Valve SCG238A050-230V 50HZ, 2 port(s) , NC, 230 V ac, 1 in BSP

Subtotal (1 unit)*

£187.62

(exc. VAT)

£225.14

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 12 unit(s) shipping from 06 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£187.62

*price indicative

RS Stock No.:
370-0264
Mfr. Part No.:
SCG238A050-230V 50HZ
Brand:
EMERSON ? ASCO
Find similar products by selecting one or more attributes.
Select all

Brand

EMERSON ? ASCO

Supply Voltage

230 V ac

Number of Ports

2

Connection Size

1 in BSP

Connection

1 in G Female

Operation

Pilot

Default Valve Position

NC

Suitable Applications

Water

Type

2/2

Orifice Diameter

25mm

Body Material

Brass

Series

238

Maximum Working Pressure

10 bar

Operating Temperature Range

-20 → +85 °C

Thread Standard or Connection Type

G

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+85°C

Connection Gender

Female

Flow Factor Kv

10m³/h

RoHS Status: Exempt

COO (Country of Origin):
PL

238 series 2/2 power-assisted solenoid valves


Two way solenoid valves for controlling hot and cold water.
No minimum operating pressure (floating diaphragm).
Solenoid valves designed to eliminate water hammer when water is turned off.
Self-cleaning device integrated into the diaphragm aperture for optimum performance.


Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Related links