Burkert Solenoid Valve 126149, 3 port , NC, 230 V ac, 1/4in

  • RS Stock No. 306-9816
  • Mfr. Part No. 126149
  • Brand Burkert
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

6014 General Purpose Solenoid Valve

Brass bodied, normally closed solenoid valves.

Coil changed easily with valve in place
Two female ports and a 1/8 in. male vent port
Coil can be locked in four by 90° positions or move free between, as required
Brass body and FKM high quality seal material
Epoxy encapsulated coil
Fluid temperature range: -10 to +90°C
Suitable for use with water, neutral fluids air natural, gases, oil and fats (without additives)
Maximum viscosity: 21mm2/s
Operating temperature: –10 to +100°C max.
Power consumption: 21VA (a.c. in rush), 12VA/8W (constant) 8W (d.c.)
Protection to IP65 with cable plug DIN43650C

//media.rs-online.com/t_line/L439004-03.gif

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 3
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 3/2
Orifice Diameter 2mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +55 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Connection Gender Female
Maximum Opening Time 15ms
Series 6014
Flow Factor Kv 0.11m³/h
Maximum Closing Time 20ms
Thread Standard or Connection Type G
1 In stock for FREE next working day delivery
Price Each
£ 74.23
(exc. VAT)
£ 89.08
(inc. VAT)
Units
Per unit
1 - 4
£74.23
5 +
£71.96
Related Products
A lightweight 3 port poppet valve from SMC ...
Description:
A lightweight 3 port poppet valve from SMC suitable for both vacuum and low pressure pneumatic systems. The VG342 is lightweight, has a large flow capacity, low power consumption. Available with normally closed or normally open actuation.
Internal timers can be adjusted after the supply ...
Description:
Internal timers can be adjusted after the supply is isolated without removing the unit. Robust polyamide construction to DIN 43650For controlling RS solenoid valves and others with the same type of terminationProtected to IP65User programmable via built-in DIP switches and internal potentiometersOn-delay, on-pulse, asymmetrical recycler pause/pulse start timer functionsEight time ...
Made from anodised aluminiumSolenoids from either the 2-way ...
Description:
Made from anodised aluminiumSolenoids from either the 2-way or 3-way ranges may be mounted together on the same manifoldNormally closed solenoid valves may be mounted on the same manifoldBlanking plate, with plug and G 1/8 seal ring, to cover unused outlets, is available separately (stock no. 244-575).
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is ...