Solenoid interlocks demand accurate alignment of actuator and device, the patented AZM 200 solenoid interlock from Schmersal eliminates this problem due to newly developed sensor technology. The actuator and interlock can now have an offset of ± 5 mm and the actuator still engages the interlock. This simplifies the mounting and reduces regular maintenance and adjustment of the safety guard. As an additional installation feature, the AZM 200 has two slotted mounting holes, enabling a quick and smooth mounting on aluminium profiles or steel frames using just two screws. The slim, symmetrical design is ideally suited for installation on current profiles with a minimum width of 40 mm.
Three LED's indicate the operating state. Therefore, the operator always knows whether the door is released for unlatching. This interlock offers enormous advantages particularly for fences around hazardous areas with walk-in access. Due to the one-hand operation of the emergency handle, the hazardous area can be left quickly and safely, even during a power failure.
The AZM 200 increases machine availability through the integrated modern electronics. This is because intelligent diagnosis provides fast trouble-shooting. A fault does not lead to an immediate machine switch-off, the fault is first signalled so that the machine can be progressively shut down in a controlled manner.
The AZM 200 can even be wired in series with other AZM 200 solenoid interlocks and also with the Schmersal safety sensor CSS 180. This feature considerably reduces the wiring costs and simplifies the set-up of safety circuits.

Thermoplastic enclosure
Guard locking monitored
Electronic contact-free, coded system
Maximum length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
Manual release
IP67 to IEC/EN 60529

Stock no. 880-1794 for sliding guards, left hand
Stock no. 880-1797 for sliding guards, right hand
Stock no. 880-1791 for one-hand emergency exit, left hand
Stock no. 880-1801 for one-hand emergency exit, right hand
Stock no. 880-1804 is a lockout tag

Actuators must be ordered separately.

EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 60947-5-1.

TUV, cULus.

Use this solenoid interlock switch from Schmersal to control access to restricted areas and hazardous machinery. It uses magnetic force to operate, reducing the risk of mechanical wear for an enhanced service life. The unit features three LEDs that clearly display the operating status for ease of monitoring. For added safety and convenience, the switch comes with a manual release function. Thanks to its glass fibre-reinforced thermoplastic construction, this switch is highly durable and resistant to heat for use in harsh industrial environments.

• Allows for an offset of 5mm vertically and 3mm horizontally between the actuator and the interlock for ease of installation
• Robust service life of 1,000,000 operations for long-lasting performance
• M12 connector type for ease of connection
• Broad operating temperature range of -25°C to +60°C for use in demanding environments

• Industrial automation
• Lifts
• Construction industry

Yes, this switch has an IP67 rating, meaning it's dust-tight and protected against submersion in 1m of water for up to 30 minutes.