PR Electronics 3100 Series Bipolar Isolated Converter, Current/Voltage Input, Current/Voltage Output, 16.8/31.2 V dc

View all Signal Conditioners

Subtotal (1 unit)*

£170.50

(exc. VAT)

£204.60

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • 6 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£170.50

*price indicative

RS Stock No.:
796-7098
Mfr. Part No.:
3117
Brand:
PR Electronics
Find similar products by selecting one or more attributes.
Select all

Brand

PR Electronics

Product Type

Bipolar Isolated Converter

Input Signal Type

Current/Voltage

Output Signal Type

Current/Voltage

Input Range

-11.5 to 11.5 V, -23 to 23 mA

Output Range

0 to 11.5 V, 0 to 23 mA

Isolation

2.5kV ac

Hazardous Area Certification

ATEX

Mount Type

DIN Rail

Minimum Operating Temperature

-25°C

Terminal Type

Screw

Maximum Operating Temperature

70°C

IP Rating

IP20

Signal Conditioner Type

Analogue Signal Chain Converter

Standards/Approvals

ATEX 2014/34/EU KEMA 10ATEX0147 X, LVD 2014/35/EU, EAC TR-CU 020/2011, FM FM17US0004X / FM17CA0003X, UL 61010-1, RoHS 2011/65/EU, DNV-GL Marine Stand. f. Certific. No. 2.4, EMC 2014/30/EU, IECEx KEM 10.0068X

Series

3100

COO (Country of Origin):
DK

PR Electronics 3117 Bipolar Isolated Converter


PR 3117 bipolar isolated converter for conversion of voltage and current bipolar process signals to unipolar signals. The unit offers 3-port isolation and provides surge suppression and protects control systems from transients and noise.

The PR 3000 series is a family of compact, fast, and easy to use 6 mm signal conditioners with exceptional performance and EMC immunity for dedicated applications – including indoor and outdoor environments with wide temperature fluctuations. Designed and rated to operate between 25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly. These high-performance devices utilize our innovative microprocessor technology to provide high base accuracy, low power consumption, and maximum protection against error due to electromagnetic noise.

Features and Benefits


• High basic 0.05% accuracy in all available signal ranges;• 2.5 kVAC isolation and have excellent noise immunity;• NAMUR NE21 burst A criteria;• Transmits rapid changes in process measurements to PLC/DCS for fast and accurate monitoring of critical signals;• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements ;• Long term accuracy better than 0.1% / 3 years with no need for re-calibration;• Installation in ATEX Ex zone 2 / IECEx Zone 2 / FM division 2

DIP-switch programming


Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting


Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High level of isolation


Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device status indicators


A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over voltage- / polarity protection


All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting


Related links