PR Electronics 3100 Series Isolating Signal Converter, Current Input, Current Output, 16.8V dc, 31.2 V dc Supply, ATEX

View all Signal Conditioners

Subtotal (1 unit)*

£181.50

(exc. VAT)

£217.80

(inc. VAT)

Add to Basket
Select or type quantity
In Stock
  • Plus 44 unit(s) shipping from 20 April 2026
  • Plus 37 unit(s) shipping from 20 April 2026
  • Plus 8 unit(s) shipping from 20 April 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£181.50

*price indicative

RS Stock No.:
796-7082
Mfr. Part No.:
3108
Brand:
PR Electronics
Find similar products by selecting one or more attributes.
Select all

Brand

PR Electronics

Product Type

Isolating Signal Converter

Input Signal Type

Current

Output Signal Type

Current

Input Range

0 to 20.5 mA

Output Range

0 to 20.5 mA

Isolation

2.5kV ac

Supply Voltage

16.8, 31.2V dc

Hazardous Area Certification

ATEX

Mount Type

DIN Rail

Maximum Operating Temperature

70°C

Terminal Type

Screw

Minimum Operating Temperature

-25°C

IP Rating

IP20

Standards/Approvals

UL UL 61010-1, IECEx KEM 10.0068X, LVD 2014/35/EU, RoHS 2011/65/EU, EAC TR-CU 020/2011, DNV-GL Marine Stand. f. Certific. No. 2.4, EAC Ex TR-CU 012/2011 RU C-DK.GB08.V.00410, FM FM17US0004X / FM17CA0003X, ATEX 2014/34/EU KEMA 10ATEX0147 X, EMC 2014/30/EU

Series

3100

COO (Country of Origin):
DK

3108 Isolated Signal Splitter and Repeater


PR 3108 isolated signal splitter and repeater for the isolation and conversion of DC signals. Designed for galvanic isolation of current signals to SCADA systems or PLC equipment.

The PR 3000 series is a family of compact, fast, and easy to use 6 mm signal conditioners with exceptional performance and EMC immunity for dedicated applications – including indoor and outdoor environments with wide temperature fluctuations. Designed and rated to operate between 25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly. These high-performance devices utilize our innovative microprocessor technology to provide high base accuracy, low power consumption, and maximum protection against error due to electromagnetic noise.

Features and Benefits


• High basic 0.05% accuracy in all available signal ranges;• 2.5 kVAC isolation and have excellent noise immunity;• NAMUR NE21 burst A criteria;• Transmits rapid changes in process measurements to PLC/DCS for fast and accurate monitoring of critical signals;• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements ;• Long term accuracy better than 0.1% / 3 years with no need for re-calibration;• Installation in ATEX Ex zone 2 / IECEx Zone 2 / FM division 2

DIP-switch programming


Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting


Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High level of isolation


Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device status indicators


A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over voltage- / polarity protection


All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting


Related links