Intelligent LED Solutions ILE-BI01-GGRIRICBD-SC201., BIOFY Sensor Version 1.0 for SFH 7072 for Fitness Trackers, Mobile

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

At the heart of each Biofy® Eco1 is a Biofy® SFH7072 sensor. Apart from two green emitters and one photodiode with an infrared filter, it also contains one red and one infrared emitter as well as a broadband photodiode. The distance between the three latter components was increased so that more light is reflected onto the detector. The
improved signal quality of the measurements with infrared and red light simplifies the calculation of the oxygen saturation of blood (SpO2). Eco1s are compact, powerful LED light sources built on FR4 PCB with thermal vias for optimal thermal management. Biofy® Eco1s generate very little heat and therefore do not require any secondary Heat Sinking.

Biofy® Eco1s contain a Biofy® SFH7072 Sensor*
Mounting holes using M3 screws allows easy installation
Size (LxWxH): 20.25x13.70x0.90mm
SFH7072 contains:
1 x Infrared Emitter 950nm
1 x Red LED 660nm
2 x Green LED 530nm
1 x IR Cut Detector with a spectral range sensitivity of 402...694nm
1 x Broadband Detector spectral range sensitivity of 420…1100mm

Specifications
Attribute Value
Featured Device SFH 7072
For Use With Fitness Trackers, Mobile Devices, Smart Watches, Wearable Devices
Kit Name BIOFY Sensor Version 1.0
14 In stock for FREE next working day delivery
Price Each
£ 8.45
(exc. VAT)
£ 10.14
(inc. VAT)
Units
Per unit
1 - 4
£8.45
5 - 9
£7.75
10 - 24
£7.15
25 +
£6.64
Related Products
The SPWF01SA and the SPWF01SC series of intelligent ...
Description:
The SPWF01SA and the SPWF01SC series of intelligent Wi-Fi modules embodies an affordable solution to plug and play and standalone 802.11 b/g/n devices, which enables easy integration of wireless Internet and IoT connectivity features into existing or new products.The Modules are configured around a single-chip 802.11 transceiver with integrated PA ...
BAROMETER click is a mikroBUS add-on board for ...
Description:
BAROMETER click is a mikroBUS add-on board for measuring the atmospheric barometric pressure. It features the MEMS high precision pressure sensor LPS25HB, a 260 to 1260 hPa Absolute 24-bit resolution digital output Barometer. High-resolution mode (0.01 hPa RMS)Low-resolution mode for reduced power consumption (4 μA)Pressure output data rate from 1 ...
Accel 2 click mikroBUS™ is a mikroBUS add-on ...
Description:
Accel 2 click mikroBUS™ is a mikroBUS add-on board with LIS3DSH IC module by ST. The module is a calibrated three-axis accelerometer that embeds a FIFO buffer and two programmable state machines. The click board communicates with the target board MCU through the mikroBUS™ over SPI or I2C interface.Areas of ...
The TSYS02D provides the necessary hardware to interface ...
Description:
The TSYS02D provides the necessary hardware to interface the TSYS02D digital temperature sensor to any system that utilizes Grove compatible expansion ports configurable for I²C communication. The TSYS02D sensor is a self-contained temperature sensor that is fully calibrated during manufacture. The sensor model works in 5V voltage external. The TSYS02D ...