The connection cables are equipped with a female connector at Head A featuring an M8, 4 pin, straight, A coded configuration, and a male connector at Head B with an M8, 3 pin, straight, A coded setup. The locking plug connector uses a screw connection method. The connectors are constructed with TPU material in a sleek black color, and the locking nut is made of zinc die cast, nickel plated material for the female connector and nickel plated brass for the male connector.

The seal material is FKM, and the recommended tightening torque is 0.4 Nm, with a width across flats of 9. The cable has a length of 0.6 meters and consists of 4 wires with a PUR jacket that is halogen free and black in color. The cable diameter is 4.5 mm, and the conductor cross section is 0.25 mm².

-

Zones with oils and lubricants
Drag chain operation
Robot