Digilent 410-299 for use with JTAG-HS3, Xilinx Tool

  • RS Stock No. 134-6435
  • Mfr. Part No. 410-299
  • Brand Digilent
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-HS3 FPGA Programming Cable

The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.


• Separate Vref drives JTAG signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
• Compatible with Xilinx ISE 14.1 and newer
• Compatible with Xilinx Vivado 2013.3 and newer
• PC connector: MicroUSB
• JTAG connector: 2 x 7-pin 2mm
• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform

Supported Target Devices

• Xilinx FPGAs • Xilinx Zynq-7000
• Xilinx CoolRunner™/CoolRunner-II CPLDs
• Xilinx Platform Flash ISP configuration PROMs
• Selected third-party SPI PROMs
• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs • Xilinx 1700 and 18V00 ISP configuration PROMs
• Xilinx FPGA eFUSE programming


This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

USB cable

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Attribute Value
For Use With JTAG-HS3, Xilinx Tool
34 In stock for FREE next working day delivery
Price Each
£ 44.45
(exc. VAT)
£ 53.34
(inc. VAT)
Per unit
1 +
Related Products
J-Link PLUS is a JTAG programming and debug ...
J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Comes with integrated licenses for unlimited breakpoints in ...
Designed to control brushed 12V DC motors, supports ...
Designed to control brushed 12V DC motors, supports other motors within 12-24VSmooth and precise motor control aided by fast output switching frequencyEasily mountable to robot frames via through-bolt mounting holes and zip-tie channelsRuggedized, durable caseThermally-aware design, does not require a fan for coolingRobust large gauge input/output cablesQuickly configurable via Brake/Coast ...
The Click accessory modules plug into the MikroBUS ...
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. EXPAND Click features an SPI to 16-bit I/O expander device. MCP23S17 port expander with SPI clock speeds up to 10 MHz16 x GPIO pins divided into two 8-bit portsSelectable hardware address using SMD jumpersCommunication: serial SPI ...
The Calamari Lure is a plug-in expansion board ...
The Calamari Lure is a plug-in expansion board for the MinnowBoard Max single-board computer. It features some very simple input/output devices for demonstration purposes.More information at: http://www.elinux.org/Calamari_Lure. 2 x PWM-controlled LEDsGPIO-controlled RGB LEDGPIO-controlled 7-segment LED displayMCP3004 serial SPI ADC provides analogue input from a slider potentiometer32KB EEPROM on I2C serial ...