Eaton Dual-Channel Emergency Stop, Safety Switch/Interlock Safety Relay, 24V, 3 Safety Contacts

The ESR5 safety relay from Eaton is designed to monitor the signals from safety systems at all times and switch off quickly and reliably in an emergency. These relays are suitable for automation and control applications that meet the highest safety requirements in accordance with EN 954-1, EN ISO 13849-1 up to PL e and accordance with IEC 62061 up to SILCL 3.

UL, cULus, TÜV.

The Eaton ESR5 NO 31 safety relay, with built-in multi-channel (4 Safety contacts) offers you versatile analysis of potential hazards in your machine moving environment. This model of ESR5 allows you to control all your safety devices such as emergency stops buttons, movable guards, light curtains or two hand monitoring controls. In the unlikely event there is a failure or hazard detected, the ESR5 NO 31 will work quickly to switch off the power to the machine.

• Internal logic of the safety relay will monitor your entire safety circuit and all connect peripherals such as (emergency stop buttons, safety doors or light curtains) and will run the path for you when in a fault-free state.
• This particular model offers you one or two channel variants so you can implement your safety appliances.
• In the event of a fault, the safety relay will quickly engage its primary function in cutting off power to the affected area/s.
• Detect faults before at the input level using integrated diagnostic devices.

• Narrow in width allowing you to house more important safety devices in your area where space may be an issue.
• Wide range of features offered with the device, allowing you to stay flexible and able to respond immediately to current or future changes in application requirements. This will save you cost & time in the long term.
• Many safety switching contacts and up to 5 enable and 2 signal current paths
• Approved to TÜV Rheinland, UL/CUL, CSA
• Economic monitoring

• Up to Performance Level PL e to EN ISO 13849-1
• Up to Safety Integrity Level SIL CL 3 to IEC 62061

Part of the Eaton E-Stop family

Eaton formerly known as Moeller