Broadcom Incremental Encoder 30000rpm -0.3 → 7 V dc

  • RS Stock No. 796-7802
  • Mfr. Part No. AEAT-6600-T16
  • Brand Broadcom
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MY
Product Details

Magnetic Encoders

The magnetic encoder IC range from Avago Technologies consists of contactless 10-bit to 16-bit programmable magnetic rotary encoders. They offer an internal voltage regulator and precise angular measurements throughout a full turn of 360°. A simple two-pole magnet is able to measure the angle by rotating it over the centre of the chip, positioned above or below the IC. The Avago magnetic rotary encoder IC is a system-on-chip (SoC), combining analog front end, digital signal processing and integrated Hall elements in a single device. A power-down mode is also available for the magnetic encoders in order to reduce current consumption. The Avago Technologies encoder ICs offer a user-programmable zero position, direction and index pulse width. A variety of possible applications include 3-phase commutation for brushless DC motor, resolver and potentiometer replacement and industrial automation and robotics.

Operating temperature: -40 to 125°C
Operation: 5V or 3.3V
Incremental output: 8 to 1024 cycles per revolution (CPR)
3-wire or 2-wire SSI interface mode for absolute output
Incremental output modes: ABI or UVW, and PWM
TSSOP-16 IC package

Avago Technologies Rotary Encoders

Specifications
Attribute Value
Encoder Technology Incremental
Maximum Revolutions 30000rpm
Output Signal Type Push Pull
Supply Voltage -0.3 → 7 V dc
Resolution 16 Bit
Overall Height 0.9mm
Overall Width 5mm
Overall Depth 4.4mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Switching Frequency 512 kHz
22 In stock for FREE next working day delivery
Price Each
£ 6.54
(exc. VAT)
£ 7.85
(inc. VAT)
Units
Per unit
1 +
£6.54
Packaging Options:
Related Products
EM14 series 14 mm rotary optical encoders with ...
Description:
EM14 series 14 mm rotary optical encoders with a compact package size, splashproof shaft seal, high rotational life cycle and HCMOS, CMOS and TTL compatability. These EM14 series rotary optical encoders are available with detent (stock number 789-9497) and standard push switch (stock numbers 691-7695, 691-7692, 691-7705, 691-7709, 691-7718, 827 ...
The AEAT-601B is a low-cost rotary quadrature encoder ...
Description:
The AEAT-601B is a low-cost rotary quadrature encoder that converts the rotation of a shaft to a series of pulses on 3 digital output channels. A suitable microcontroller can calculate angular position, speed and rotational direction from the two signals in phase quadrature and one-pulse per revolution index channel. The ...
Its robust design and its high protection level, ...
Description:
Its robust design and its high protection level, the draw wire encoder D125 reliably provides accurate length measurement. Its simple and optimal integration in the application is a particular highlight of this product. Many additional options, ranging from the integrated inclinometer up to the relay output, are available. To increase ...
Snap-in & PCB mountable versionsKnurled or flatted plastic ...
Description:
Snap-in & PCB mountable versionsKnurled or flatted plastic shaft typesContacts 100 mΩ max rated at 0.5mA 5VdcOptional push switch rated at 10mA 5VdcSingle LED for non switch types and dual LED for switched typesInsulation resistance 250 Vac 100MΩ min.Incremental TypePush on switch optionVarious shaft LengthsLED colour optionsDetent options.