Siemens 3SE7 Rope Pull Switch, 25m, NO/NC, Straight

Image representative of range

Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.

Alternative

This product is not currently available. Here is our alternative recommendation.

Each

£267.37

(exc. VAT)

£320.84

(inc. VAT)

RS Stock No.:
764-4301
Mfr. Part No.:
3SE7150-1BD04
Brand:
Siemens
Find similar products by selecting one or more attributes.
Select all

Brand

Siemens

Normal State Configuration

NO/NC

Cable Length

25m

Mounting Orientation

Straight

IP Rating

IP65

Series

3SE7

Range

SIRIUS

Length

164.5mm

Width

52mm

Depth

74.5mm

Housing Material

Aluminium Alloy

Maximum Operating Temperature

+70°C

Minimum Operating Temperature

-25°C

Maximum AC Voltage

400V

Dimensions

164.5 x 52 x 74.5mm

Maximum Current

6A

Conduit Entry

M20 x 1.5

COO (Country of Origin):
DE

3SE7 Emergency Grab Wire Switch


The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.
As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems.

Design


The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts.
The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m.

Function


The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position.

Positive latching and positive NC contacts
Switches for wire lengths up to 75m
Metal housing
Enclosure is screw mounted
IP67 rating
Operating temperature: -25 to +70°C

Note

Stock nos. 764-4341, 764-4301, 764-4304, 764-4357 are fitted with an indicator light.

Approvals

UL,CSA

Standards

The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1.

Related links