INA HK5528 55mm I.D Drawn Cup Needle Roller Bearing, 63mm O.D
- RS Stock No.:
- 194-6956
- Mfr. Part No.:
- HK5528
- Brand:
- INA
Bulk discount available
Subtotal (1 unit)*
£26.67
(exc. VAT)
£32.00
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 17 November 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
---|---|
1 - 4 | £26.67 |
5 - 9 | £25.09 |
10 - 24 | £24.59 |
25 + | £24.04 |
*price indicative
- RS Stock No.:
- 194-6956
- Mfr. Part No.:
- HK5528
- Brand:
- INA
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | INA | |
Inside Diameter | 55mm | |
Outside Diameter | 63mm | |
Roller Bearing Type | Drawn Cup Needle | |
Race Width | 28mm | |
Bore Type | Parallel | |
Material | Steel | |
Static Load Rating | 103000N | |
Cage Material | Sheet Steel | |
Number of Rows | 1 | |
Dynamic Load Rating | 44000N | |
End Type | Open | |
Fatigue Limit Load | 14900N | |
Select all | ||
---|---|---|
Brand INA | ||
Inside Diameter 55mm | ||
Outside Diameter 63mm | ||
Roller Bearing Type Drawn Cup Needle | ||
Race Width 28mm | ||
Bore Type Parallel | ||
Material Steel | ||
Static Load Rating 103000N | ||
Cage Material Sheet Steel | ||
Number of Rows 1 | ||
Dynamic Load Rating 44000N | ||
End Type Open | ||
Fatigue Limit Load 14900N | ||
Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies
Can support high radial loads (are pure radial bearings)
Require a considerably smaller radial design envelope than machined needle roller bearings
Usually run directly on the shaft (no inner ring)
Permit relatively high speeds
Are easy to mount
Require no additional means of axial retention (as a result of which the housing bore is easy to produce)
Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)
Result in particularly compact, cost-effective and economical bearing arrangements
Related links
- INA HK5520-HLA 55mm I.D Drawn Cup Needle Roller Bearing, 63mm O.D
- NTN 1R55X63X25 55mm I.D Needle Roller Bearing Needle Roller Bearing, 63mm O.D
- NTN 1R55X63X45 55mm I.D Needle Roller Bearing Needle Roller Bearing, 63mm O.D
- SKF HK 5520 55mm I.D Needle Roller Bearing Needle Roller Bearing, 63mm O.D
- INA HK0606-B 6mm I.D Drawn Cup Needle Roller Bearing, 10mm O.D
- INA HK1210-B 12mm I.D Drawn Cup Needle Roller Bearing, 16mm O.D
- INA HK1816-B 18mm I.D Drawn Cup Needle Roller Bearing, 24mm O.D
- INA HK2526 25mm I.D Drawn Cup Needle Roller Bearing, 32mm O.D