JSP BMN740-000-600 Dust, Mist Filter Cartridge for use with JSP FORCE8 Respirator Mask

  • RS Stock No. 181-2939
  • Mfr. Part No. BMN740-000-600
  • Brand JSP
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

PressToCheck™ P3-Filters

For use with Force 8™ Half Mask RS 879-2937
Low profile cover protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats
Bayonet connector
Reduced breathing resistance
With an integrated inhalation valve

P3 Filters (RS 879-2930 )

High efficiency dust protection
Particulate protection only

A2 P3 Filters (RS 879-2934 )

High efficiency dust protection
Medium capacity gas / vapour protection

ABEK1 P3 Filters (RS 879-2943 )

High efficiency dust protection
Low capacity gas / vapour protection

Standards

EN143

Forece 8 PressToCheck Filters

With the new patent pending Force8™ PressToCheck™ filters you can instantly check that you have the correct seal every time.

How to use Force 8 PressToCheck Filters

• Comfort FIT IT!
Don the Mask - Put the straps and harness over your head and pull the straps to a suitably tight and comfortable fit.
• PRESS IT!
PressToCheck™ - Press the front and backs of both filter covers together to stop air from entering through the filters.
• CHECK IT!
Inhale - No air should come through the mask. Adjust the mask and repeat until it doesn't. Release when seal is made.

Applications

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as;

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C


Half-mask or full-mask respirators?

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

Specifications
Attribute Value
Filter Type Dust, Mist
For Use With JSP FORCE8 Respirator Mask
Available to back order for despatch 24/08/2020
Price Each
£ 12.255
(exc. VAT)
Units
Per unit
Per Pack*
2 +
£12.255
£24.51
*price indicative
Related Products
The 3M™ Versaflo™ Powered Air Turbo TR-600 is ...
Description:
The 3M™ Versaflo™ Powered Air Turbo TR-600 is a belt mounted air purifying device. When combined with one of the 3M approved headtops, it forms a power-assisted system for respiratory protection against particles, nuisance odours (where applicable) and gases and vapours. The filter attaches directly to the turbo.
A Lightweight and comfortable negative flow respirator comprising ...
Description:
A Lightweight and comfortable negative flow respirator comprising of a Top Cap protective baseball cap with peak-mounted, turbo-fan and air filters, providing the wearer with continuous flow of purified, cooling air over the face and protection against airborne particulate pollutants, relieving problems caused by dusts. Provides all-round head, eye and ...
The new Filterspec is a unique combination of ...
Description:
The new Filterspec is a unique combination of Safety spectacle and disposable respirator. Stylish spectacle design Fully adjustable frame for maximum comfort and security6.5 base, one-piece lens offers optimal coverage Anti-mist and Anti-scratch coating on lens Disposable filter mask Reusable filter holder for an economical PPE solution LightweightExhale valve for ...
The new Filterspec is a unique combination of ...
Description:
The new Filterspec is a unique combination of Safety spectacle and disposable respirator. Stylish spectacle design Fully adjustable frame for maximum comfort and security6.5 base, one-piece lens offers optimal coverage Anti-mist and Anti-scratch coating on lens Disposable filter mask Reusable filter holder for an economical PPE solution LightweightExhale valve for ...