Seeed Studio 113990496, LARA-R211 2G, 3G Development Board LTE Cat 1 Pi HAT (Europe) for Raspberry Pi 1 Model B+

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions.LTE CAT.1 Pi HAT is designed for LTE Category 1 networks and with 2G fallback(EU version only). Embedding common protocols, like TCP/UDP, HTTP.LTE CAT.1 Pi HAT support UART and USB interfaces. By UART, Raspberry Pi communicate with LTE CAT.1 Pi HAT via AT command without any special driver. It’s well suited for building prototyping rapidly.

Compatible with Raspberry Pi 1 Model B+ and later versions
LTE CAT.1 and support 2G fallback(EU version only)
UART and USB interface for communicate
Support Grove I2C and Digital connector
Protocols on cellular module
Embed TCP/UDP stack
Embed HTTP, FTP, SSL
Dual stack IPV4/IPV6
3GPP TS 27.007 [8], TS 27.005 [9] standard AT command
Applications:
IoT gateway
Data logger
Vending machine
POS
Smart home devices
Robot
Advertising
Other scenario need cellular networks

Specifications
Attribute Value
RF Technology 2G, 3G
Classification Development Board
Kit Classification Development Board
For Use With Raspberry Pi 1 Model B+
Featured Device LARA-R211
Kit Name LTE Cat 1 Pi HAT (Europe)
Available to back order for despatch 16/09/2020
Price Each
£ 57.31
(exc. VAT)
£ 68.77
(inc. VAT)
Units
Per unit
1 +
£57.31
Related Products
The Pi RTC is based on the clock ...
Description:
The Pi RTC is based on the clock chip DS1307, it can provide a real-time clock(RTC) for raspberry pi via the I2C interface. Real-time clock of this module counts seconds,minutes, hours, date of the month,month, day of the week, and year with leap-year compensation valid up to 2100. The clock ...
Use between 1 and 6 matrices in your ...
Description:
Use between 1 and 6 matrices in your choice of green and/or red. Perfect for building a retro scrolling message display, a tiny 30-band spectrum analyser, or a retro clock.Micro Dot p HAT also works well with our other p HATs and HATs. You could use it in combination with ...
Support Raspberry Pi 3B/3B+/4I2C-compatible serial interface LOW current ...
Description:
Support Raspberry Pi 3B/3B+/4I2C-compatible serial interface LOW current consumption:Continuous Mode: Only 150μASingle-Shot Mode: Auto Shut-Down Internal low-drift voltage reference and oscillator Input multiplexer (MUX) that provides two differential or four single-ended inputs.Programmable comparator ApplicationsAnalog-to-digital converter Portable instrumentation Battery monitoring Temperature measurement Factory automation and process controls.
The Raspberry Pi-B1 module by Eccel Technology Limited ...
Description:
The Raspberry Pi-B1 module by Eccel Technology Limited is based around the RFID B1 module. Introduced as a hat product and is suitable for adding RFID/NFC(13.56 MHz) capability to the Raspberry Pi (RS 8968660). Simple and easy to use without extensive RFID and embedded software knowledge. The device meets the ...