Silicon Labs 8-bit USB Debug Adapter

The Silicon Labs 8-bit USB Debug Adapter (UDA) provides the interface between the PC’s USB port and the C8051Fxxx’s in-system debug/programming circuitry. This USB Debug Adapter is capable of providing power to some of the Silicon Labs circuit boards via pin 10 of the debug connector. This attached 10-pin debug ribbon cable connects the adaptor to a target board and the target devices debug interface signals. The adapter is powered from the USB connection to the PC. This USB cable is included as part of the USB debug adaptor. This USB Debug Adapter can automatically change the communication voltage level based on the level detected on pin 7 of the connector. It requires a target system clock of 32kHz or greater. The USB Debug Adapter uses the Human Interface Device (HID) USB interface to communicate with the PC.

USB debug adapter can supply up to 100mA to the target system
Has a reset button
Minimum C2 programming connections

Silicon laboratories
Used with C8051Fxxx
Used with EFM8 MCUs

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007