Burkert Brass In-line Flow Sensor Fitting 1/2in Straight Flow Adapter 1/2BSP

  • RS Stock No. 249-7579
  • Mfr. Part No. 423980
  • Brand Burkert
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Brass S030 In-Line Flow Adaptors For Use With 8025, SE35, SE32, SE30 and 8021 flow controllers

In-line flow adaptors incorporating paddle wheel transducer which is set in rotation when liquid flows through the pipe.

G-port connection (internal thread)
PVDF paddle wheel and ceramic axis and bearing
Measuring range from 0.3 m/s (AF> 1//2 inch pipe, 0.3 fps flow velocity), 0.1 to 10 m/s (0.3 to 32.8 fps)
Repeatability 0.45 % of measured value
O-ring material; FPM standard

Specifications
Attribute Value
Fitting Direction Straight
Fitting Type Flow Adapter
Connection 1/2 in G
Series S030
Material Brass
Maximum Working Pressure 16 bar
Connection Size 1/2in
Thread Standard or Connection Type G
Available to back order for despatch 09/01/2020
Price Each
£ 213.22
(exc. VAT)
£ 255.86
(inc. VAT)
Units
Per unit
1 +
£213.22
Related Products
The Microchip RN-270F is smaller than a business ...
Description:
The Microchip RN-270F is smaller than a business card that easily attaches to RS232 serial ports via a DB9 female connector. It gives any RS232 serial port Bluetooth capabilities and can run without external power. With a built-in AAA battery holders and an advanced sleep modes gives it an incredibly ...
From Lapp, this Skindicht ME-M reducer allows cable ...
Description:
From Lapp, this Skindicht ME-M reducer allows cable glands to adapt to threaded holes that are too large for their connecting thread. Rather than boring new holes in panels, a reducer can be used to accommodate your cable gland size, potentially saving you time and money. This presents added versatility ...
These BNX series MIL-C-38999 Bandstrap adaptors are used ...
Description:
These BNX series MIL-C-38999 Bandstrap adaptors are used with a corrosion resistant steel band (must be ordered separately - see stock number 765-0312) and are designed to terminate a braided cable shield to a connector (Raychem code 40 D38999 connector (see note). The resulting 360° termination creates an electrical connection ...
Connection of tubing at 90° with a male ...
Description:
Connection of tubing at 90° with a male thread. Tightened on the top of the fitting with a flat spanner or Allen key to facilitate assembly in tight spaces. solid construction, aesthetic and unobtrusive for a better connection, pre-coated thread ensuring direct sealing, full air flow, individual unit quality control ...