Sick PBS Plus Series Pressure Sensor, 0bar Min, 10bar Max, PNP/NPN-NO/NC + Current/Voltage Output, Relative Reading

RS Stock No.:: 213-3322
Mfr. Part No.:: PBS2-RB010SG1SSDNMA0Z
Brand:: Sick

Sick PBS Plus Series Pressure Sensor, 0bar Min, 10bar Max, PNP/NPN-NO/NC + Current/Voltage Output, Relative Reading

2 In stock - FREE next working day delivery available

5 available from Europe for delivery within 2 working day(s).

Price Each

£336.78

(exc. VAT)

£404.14

(inc. VAT)

Units	Per unit
1 +	£336.78

RS Stock No.:: 213-3322
Mfr. Part No.:: PBS2-RB010SG1SSDNMA0Z
Brand:: Sick

Datasheet - PBS2-RB010SG1SSDNMA0Z

Overview

At a glance

Switchable switching outputs (PNP/NPN) and analog output (current/voltage)
Scalable analog output (5:1 turn down)
High measurement accuracy: ± 0.5%
IO-Link for transmitting process data to the control as measured values in bar
Housing can be twisted in two places (process connection/display) and display can be rotated by 180°
Common process connections, also with flush-mounted membrane

Your Benefit

Low storage costs, short delivery times, low number of variants
Reduced installation time since housing and display can be rotated at two points
Rugged design: stainless steel measuring cell
No special conversion of IO-Link process data is required - it is shown automatically as measured values in bar
Extensive diagnosis options via IO-Link (e.g. pressure peaks, ambient temperature) deliver data for predictive maintenance
Economic solution for hydrostatic level measurement (thanks to high accuracy and small measuring ranges)

The PBS plus is an electronic pressure switch, pressure transmitter and display in one and is available with up to two switching outputs, analog output and IO-Link. It is set using three large pushbuttons and the display or via IO-Link. The housing can be twisted in two places - the display and the electrical connection can be optimally aligned in any mounting situation. With measuring ranges of 0.4 bar to 1,000 bar (gauge pressure), the PBS plus can be used in many different applications. It also has absolute pressure and vacuum measuring ranges. The PBS plus is highly resistant to corrosion due to the fully-welded stainless steel membrane. Process data is transmitted to the control via IO-Link as measured values in bar. The diagnostic options make it possible for temperature values to be read out in °C and minimum and maximum values for temperature and pressure to be monitored.

Applications

Measurement of system pressure in hydraulic systems
Control of the clamping pressure in CNC machines
Monitoring of the cylinder pressure in hydraulic presses
Control of the pressure in cooling and lubricant systems
Hydrostatic level measurement
Measurement of system pressure in PET bottle production

Note

Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

Attribute	Value
Pressure Reading Type	Relative
Minimum Pressure Reading	0bar
Maximum Pressure Reading	10bar
Accuracy	<±0.5 %
Output Type	PNP/NPN-NO/NC + Current/Voltage
Media Measured	Air, Gas, Hydraulic Fluid, Liquid, Oil, Water
Process Connection	G1/4
Analogue Output	4 → 20 mA, 0 → 10 V
Electrical Connection	M12 Connector
Communication Protocol	IO-LINK
Response Time	5 ms
Maximum Current	600 mA
Series	PBS Plus
Supply Voltage	15 - 35 V
Interface	IO-Link
Housing Material	Stainless Steel/Plastic
Mounting Type	Threaded
IP Rating	IP67
Maximum Operating Temperature	+85°C
Minimum Operating Temperature	-20°C