Comp SCX press sensor,0-1psi,diff

  • RS Stock No. 177-5943
  • Mfr. Part No. SCX01DN
  • Brand Honeywell
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): MX
Product Details

Sensym SCX Series

Cost effective solution for pressure applications that require high accuracy over a wide temperature range
Internally calibrated and temperature compensated sensors specifically designed to provide an accurate and stable output over 0 to 70°C temperature range
Calibrated zero and span
High Impedance for low power applications
Intended for use with non corrosive, non-ionic fluids such as air and dry gases etc.

Specifications
Attribute Value
Pressure Reading Type Differential
Minimum Pressure Reading 0psi
Maximum Pressure Reading 1psi
Accuracy ±1 %
Output Type Wheatstone Bridge
Media Measured Pneumatic Fluid
Electrical Connection Solder Tag
Analogue Output 0 → 18 mV
Response Time 100 μs
Supply Voltage 20 V dc
Housing Material Plastic
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Available to back order for despatch 21/01/2020
Price Each (In a Box of 25)
£ 107.888
(exc. VAT)
£ 129.466
(inc. VAT)
Units
Per unit
Per Box*
25 +
£107.888
£2,697.20
*price indicative
Related Products
These miniature Surface Mount Technology (SMT) Low Pressure ...
Description:
These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing. Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces the footprint area on the printed circuit board thereby reducing ...
The RS PRO IPS-M12 series low range pressure ...
Description:
The RS PRO IPS-M12 series low range pressure sensor has a housing made from 316L stainless steel with viton O-ring seals. It uses a piezo-electric silicon sensor. The nominal pressure output of this sensor ranges from 50mbar to 1000bar. It has a 4-pin connector. • Service temperature ranges between -20°C ...
The IPSLU-M12 is suitable for use in a ...
Description:
The IPSLU-M12 is suitable for use in a wide range of applications. The probe uses a Piezo-resistive silicon sensor, giving excellent media compatibility within an oil filled 316L stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially in high vibration/shock applications. ...
The IPSU-M12 series is suitable for use in ...
Description:
The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially for industrial applications... Each device ...