Honeywell 26PC Series Pressure Sensor, 0psi Min, 5psi Max, Wheatstone Bridge Output, Differential Reading

Range of temperature-compensated pressure sensors with voltage output.
Two point calibration.
Differential or relative pressure measurement.
Right pin.
These sensors can be used for measuring positive or negative pressures.
Connection by pins.

Measure the pressure of nitrogen gas or oxygen in your system with this sensor from Honeywell. Gas enters into the funnel, where the internal microchip detects it and measures the way it alters atmospheric pressure. The sensor has a broad operating temperature range of -40°C to +85°C, so it's suitable for use in harsh environments. The four contacts mount to your printed circuit board (PCB) using a through-hole method and can then be soldered in place for a secure, air-tight connection.

• Laser-trimmed piezoresistive semiconductor for enhanced sensitivity
• Wide pressure reading range of 0 to 5psi (pounds per square inch) for use in low-pressure systems
• Plastic body material has high impact and chemical resistance for durability
• Fast response time of 1ms (millisecond) for instant detection of irregularities
• Supply voltage range of 2.5 to 16V DC for use in low-voltage applications

• Aircraft cockpits
• Laboratory testing chambers
• Medical respirators
• Marine leak detectors

This pressure sensor has an accuracy level of ±0.25%, so it provides you with precise readings.