Druck ATEX for Fluid Gauge

  • RS Stock No. 285-318
  • Mfr. Part No. X610-11G-1300
  • Brand Druck
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Druck Precision Pressure Transmitters

Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been developed to provide a miniature micro-machined diaphragm. These gauge style pressure sensors are the perfect solution for continuous monitoring in hazardous environments.

Features & Benefits

• Metal seal assembly provides exceptional thermal and stress isolation
• Two-wire electronics includes power supply regulation and amplifier stages
• Independent zero and span controls, zero offset and span setting ±5% site adjustable by sealed, noninteracting potentiometers
• Reverse polarity and over-voltage protection
• RFI bulkhead provides feedthrough filters within the body tube assembly
• The PTX 600 series has a range of 1.5 (100 mbar) through to 10,000 psi (700 bar)
• Rugged compact design
• Great protection against electrical interference
• The transmitter provides an integral female pressure port - 1/4" NPT female
• Fluids compatible with a fully welded assembly of 316 stainless steel and Hastelloy C276 (NACE compatible grades)
• The overall length is 139mm and a diameter of 38mm
• DIN 43650 electrical connector is supplied
• Comprised of hardwearing, aesthetically pleasing stainless steel
• Suitable for use within Zone "O" Gas Group IIC, Temperature Class T4
• G'BSP connection
• Transmitter Supply Voltage: 9-30VDC
• Output Current: 4-20mA (2 wire configuration)
• Temperature effects: less than 0.5% FS over 15° to +122°F- typically 0.3% FS, 15° to +122°
• Gauge configuration (sealed gauge for pressure above 1000 PSI - Absolute for 11.5 to 17 PSI model)

Did you know?

If a product is intrinsically safe, it means that it is incapable of releasing sufficient electrical and thermal energy under normal or abnormal conditions. This results in the item not being able to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration.

Note

Supplied with instruction leaflet, a copy of certificates are available upon request

Specifications
Attribute Value
Pressure Reading Type Gauge
Minimum Pressure Reading 0bar
Maximum Pressure Reading 10bar
Accuracy ±0.08 %
Output Type Analogue
Media Measured Fluid
Process Connection G1/4
Analogue Output 4 20 mA
Electrical Connection DIN 43650 Type A
Supply Voltage 9 30 V dc
Housing Material Stainless Steel
IP Rating IP65
Hazardous Area Certification ATEX
Minimum Operating Temperature -10°C
Maximum Operating Temperature +50°C
Available to back order for despatch 03/06/2020
Price Each
£ 666.00
(exc. VAT)
£ 799.20
(inc. VAT)
Units
Per unit
1 +
£666.00
Calibration Options:
Related Products
RS PRO ATEX, IECEx Pressure Sensor Gauge ...
Description:
RS PRO ATEX, IECEx Pressure Sensor Gauge
Schneider Electric XMLA pressure switches for control circuits ...
Description:
Schneider Electric XMLA pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products. The XMLA pressure and vacuum switches have a fixed differential and are for detection of a single threshold. Fixed differential External pressure ...
Range of pressure converters used to measure relative ...
Description:
Range of pressure converters used to measure relative and absolute pressures in liquid and gas environments.Output 4 → 20 mA.AISI 304 stainless steel housing.Part in contact with measured environment in AISI 316Ti / 316L stainless steel.2-wire output with screw terminal and cable gland.
Measures the level in atmospheric tanks by measuring ...
Description:
Measures the level in atmospheric tanks by measuring the head pressure Can be used to measure the level of water, diesel, fuel oil and general Industrial liquids Fitting can be either from the top of the vessel or externally at the base Ceramic sensor housed in a stainless steel case ...